How to/ Sewing Tutorial Archives - Page 23 of 23

Tips and Tricks of Up-cycling

December 2, 2015

I love to up-cycle! With a little boy I can find boyish knits, stripes and even character prints so much easier and more affordable buying a men’s T-shirt then the $30/yd euro knit… Which I’m constantly drooling over! I also love the heathered T-shirt knit, which is harder to find in a fabric store and very easily found in RTW (Ready to wear). I love to use my husband and my old shirts as well… It’s even more special handmade with an already sentimental shirt! So here are some tips and tricks I’ve learned… 1- Buy bigger… Why not? If an XS and XXXL are the same price get more fabric 🙂 2- If it has a picture on it make sure it will fit on your smaller size you are creating. This one can be difficult if you’re buying large men’s shirts BC they are proportionally much bigger pictures/words/designs on the chest. Here is one I BARELY SQUEEZED on his little chest, but then when it is on some wraps around to the sides, so really I should’ve waited until he was a few sizes bigger!

3- Use the hem! I don’t have a cover stitch machine… Yet 🙂 and although I love my double needle using the existing hem saves time and looks nice and professional already! All you have to do is account for the hem- Most my patterns are 1″ so here I am cutting with my pattern piece 1″ below my fabric to make up for the fact that I will not be turning up and hemming.

4- Cut you RTW items down the seams, this give you nice flat pieces to last your pattern pieces out on. If there isn’t a side seam, then I don’t cut… but anywhere there are seams I go ahead and cut because you will not be able to use the area. I also cut the sleeves, again along the seam and use them if I can! Here is a shirt and shorts cut and ready to use:

5- If you’re using a shirt with a design, fold with the DESIGN centered… You’d think RTW is all centered nicely on that shirt… Until you fold it at the side seams and realize it’s not!! Often they’re off centered! 6- If you don’t have ribbed knit to match for the neckline you can use theirs…especially if you have a much larger size (men’s xxl down to a toddler size). Here are a couple of some up-cycles I’ve done: Patterns for Pirates Buccaneer BBall Shorts:

Matey Muscle Tank:

Wingman Shirt: The grey was from a heathered grey t-shirt… the Batman logo was appliqued on my sewing machine 🙂

Deep Sea V-Neck:

Cole’s Creations ‘Buttercup Dress:

Women’s Raglan:

FST/LMU Mash Nursing Hack

November 25, 2015

I love the FST and LMU mash for after baby. It makes me feel stylish, put together and comfortable! The loose aline look hides any left over baby belly and the tighter top doesn’t feel you leaving frumpy.

For this hack I essentially did a double layer body. I can lift up the top layer and have the bottom layer covering my back/belly during nursing. And it looks like a perfectly “normal” everyday shirt! 🙂

I made mine completely doubled because we are going into winter here and I didn’t mind the added warmth. If I was making this for spring or summer months I would probably tinker with a faux double layer for the back piece.

I cut 2 front and back pieces.

Then took 1 front piece to modify for the under layer. I measured on myself from the neckline to under my bust (I did happen to have on the same shirt, so I didn’t even need to guess where the neckline hit ;)). Then I transferred that measurement to the front center and curved up to the armpit.

Since the FST flares out under the bust it was a little loose there. So I added a thin elastic to the raw edge. I just held the elastic taute (not tight) on my body from seam to seam (again, I happen to be wearing this shirt, so there was no guessing!). This way the two layers would have the same finish length–without the elastic holding up the center it would droop lower then the top layer. As well as not worry about holding it up while nursing–bonus :).

I choose to put my elastic on the right side of my under layer, because I didn’t want to feel it against my skin. But you can put it on the wrong side so that it is hidden when you nurse– whatever you prefer! You will need to stretch the elastic to fit the curve. I serged mine on, but any stretch stitch will work! It will line up right at the armpit.

I sewed the shoulder seams and sleeves on like normal. Then when going down the side seams I kept the main body layers seperate (so you can lift the top layer freely). It is a bit tricky right at the armpit, but just go slowly and remember you wont be showing anyone the inside of your armpit seam! 😉

Now for hemming, I choose to hem the top layer completely normal with a 1″ allowance.

For the under layer I choose to add a pretty lace trim to stick out longer then the top layer. I wanted the seam hidden, so I trimmed off 1″ from the bottom.

I serged my lace on right sides together trimming off about 1/2″ of both shirt and lace (the top of the lace that was blank).

Then flipped up and top-stitched (I didn’t want that seam flipping and showing through the dainty lace trim!). So, I trimmed 1″ and took off another 1/2″. This means my seam on the under layer should be 1/2″ above the hemmed edge of my top layer and the lace will peek out below.

I attached the neckband normally catching both layers on the back piece and top layer of the front piece.

Tada! I love my new warm winter nursing friendly shirt! It screams fashionable and not I’m nursing! 🙂 When you’re done nursing you can still wear it as is… or cut out the under layer!

Layer Me Up Nursing Hack

November 23, 2015

I love wearing my Layer Me Up tanks under cardigans during the fall and long sleeve option during the winter. I can pull down the neckline to nurse, but I love to have something up and down for nursing in public. So, this hack was born!

It is quick and easy too, which is a plus if you’re nursing and taking care of baby!

I cut out one layer me up exactly as the pattern calls for. I added one piece using the front piece. I measured from my armpit to below my bust and transferred that to the pattern piece. This will become my lift up piece hidden under my normal pieces.

Since the layer me up is a tight fit shirt that requires a 50% stretch spandex blend fabric, you don’t necessarily need to add any elastic to keep it from stretching out with wear/pulling throughout the day. But, you might want to add it to the bottom raw edge of the hidden lift up piece just to add a little weight and to keep it from shifting around at all during wear. I serged it on, then hemmed under.

I wanted the under piece hidden, so I trimmed about 1/2″ from the neckline. You could hem it under if you wanted it to be pretty :).

Pin your under layer to the wrong side of the front piece and sew up your shirt normal–the only other modification is at the neckline. You will attach the neckband only to the main shirt and leave your hidden piece loose. This way it is free to come up when nursing.

Now you have a shirt that looks perfectly “normal” and can pull down the neckline and hidden piece up to nurse! You can wear it after just as is, or cut out your hidden piece and wear :).

I grabbed a lovely colored ribbed knit without thinking (remember I have a tiny newborn 😉 ) and it had HORRIBLE recovery. No spandex— it grew and grew and grew! So, I will be trying this hack again in the correct material!

And of course, one with Little Guy photobombing 🙂

First Time User Tips

October 23, 2015

Are you using a P4P pattern for the very first time? I’m so excited for you to try out one of my pdf sewing patterns! Here are a few tips if you are brand new to sewing a P4P pattern, or to sewing from a pattern in general.

*Buying from the site- you will receive an email with a download link after payment is processed (check JUNK mail) and you can also log back into the site to download any purchased patterns anytime!

#1: Read the tutorial thoroughly before beginning. Before you start envisioning fabric selection and thinking about what size, you need to sit and read! There is A LOT of info in the first few pages of a P4P pattern. Here are some highlights in those first few pages:

*Printing instructions- You MUST open and print from ADOBE PDF viewer, not the app, not another PDF program! This will ensure the correct scaling! I advise only printing the pattern pieces (these are listed on the first page in the tutorial) to save paper and ink-you can read the tutorial instructions on a computer, laptop, tablet, smart phone-whatever you have available! You will want to print with scaling set to “none” or custom “100%”. Carefully measure the 1×1 inch square to ensure that the pattern is printed in the correct scale (I always advise to only print the first page with the measuring inch first to test, then when you are sure it’s correct print the other pages.)

Here is a shot of what your adobe printing settings should look like before you print: Custom scale: 100% and about the preview it should say 100%

Here is a shot of the printed page with a correct 1×1 inch square:

One of the most common printing mistakes is to have the “fit to page” option clicked. Here is a shot of “fit to page” INCORRECT printing. This will result in a pattern that is much smaller then intended!

If you look, you will see a outline around the entire page about 1/8″ that should not be there. The 1×1 inch square will also measure slightly smaller.

*Piecing the pattern pieces together- I have a quick video putting the “no trim pages” together here: (you must be a member of the P4P FB group to view) Video Link

*Choosing your size- I have a size chart both in the listing pictures and in the first few pages of the tutorial. Carefully measurement yourself and find the size that your measurements correlate to. Chest-fullest part around your bust, Waist-where you naturally bend to the side, High Hip-around your hip bones, Hip-around the fullest part of bottom/booty. I only add the measurements that are important for that particular pattern.

Here is a blog post about measuring yourself.

If your measurements put you in several sizes then you can mash/blend sizes between your measurements to create the perfect fit (this is why sewing is so great! Custom fit and size for your particular body type.)
Using the “Finished Measurements”- You can flat measure other garments that are well fitting and compare, or compare to your measurements. You should be able to know exactly how much you need to add or take off for the perfect length before sewing up!
I also include the height my patterns are drafted for above the size chart (5’5″). If you are shorter or taller you will need to adjust for your height. I include a link right below the size chart to this post explaining how I prefer to add/take length for petite and tall adjustments: Petite and Tall Adjustment Blog Post
Do not choose your size based on what you buy in ready to wear/store bought clothing. Store sizing varies extremely from store to store. Just choose based on your current measurements!
Read the description of fit carefully (located under the line drawing in the tutorial).
Look through the pattern album in the group! Yes, I have an album for almost every single pattern filled with A TON of pictures of every size and option for everyone to look through to see the intended fit of the pattern. You can see where it is fitted, loose, and how it looks on a variety of sizes and body types. Most pictures are also labeled with their size and their fabric choose to help even more! You can view the albums both mobile and on a desktop! Just go to the P4P FB Group and click “view group info”. From there you can click “pictures” and go to “albums”. Scroll through for the particular patterns you’re looking for! 🙂
Mobile View:

Desktop View:

*Choosing fabric- One of the most IMPORTANT parts of following a pattern is to use fabric that is suggested by the designer. If you don’t you will not have the intended look that is shown on the cover and listing pictures. The wrong fabric can mean a loose fit turns snug, a flowy fit turns tent-like, and so on.

Knit fabrics- I often give the percent of stretch knit fabrics should have for fitted patterns. Here is a quick link to my sister’s blog with a video on how to find the percentage of stretch: Megan’s Blog Post
Different fabric = Different look and fit— if you do not follow the suggested types of fabric you have to be prepared for the garment to not look and fit how it is intended and showed in the pattern listing pictures. I make sure that all my testers follow those suggestions, so all the tester pictures are going to show the intended fit and look.
Buying online- I love to buy online. In fact, I pretty much get fabric from an online source or scramble to “borrow” some from my Mama’s large stash ;). I hardly ever make it to a brick and mortar store! BUT, there seems to be an endless amount of fabric types to learn as a beginner seamstress and online shopping can be very difficult to navigate. I always suggest buying from a smaller shop that you can message questions to! Being able to ask how thick/thin, percentage of stretch and even if it would be good for a certain type of garment is such a nice bonus to supporting a smaller shop!
- Here are just a few smaller shops I know of: Purpleseamstress on FB, NR fabrics on FB, Girl Charlee (little bigger, but still very helpful customer service and cheaper price for beginners to learn on), there is an abundance of custom knit designers and producers on FB that are smaller businesses (but be weary-sadly there are many that have been scammed by these groups, so look for well established custom groups). I love destash fb pages where you can buy from other seamstresses, but often you’re buying from someone who doesn’t know the full description of the fabric, so I don’t recommend this for beginners.
- Stick to searching the exact recommended fabrics until you are confident with all the different kinds of fabrics out there
Fabric Requirements- I list fabric requirements on the last listing picture under the size chart as well as the first few pages of the tutorial. I often break up the fabric requirements into different options and different parts of the garment. Example: women’s raglan I list main body 7/8yd and long sleeves 7/8 yd, this means you will need 7/8 for the main body and an ADDITIONAL 7/8 for the sleeves.
- As described in the tutorial, the fabric requirements do not include extra for fabric being cut off grain, shrinkage after prewashing (I ALWAYS recommend pre-washing fabric before cutting!), or to match any kind of patterned fabric/directional fabrics.
- I recommend buying a little more to account for these things 🙂

*Looking for more inspiration- If you have looked through the listing pictures, album pictures in the FB group and still want to see more you can use the search with our hashtags to help! I try to tag most pictures I see with hastag/pattern name… here are a few for examples: #peglegs #womensraglan #womenshenley #carefreecardigan #cptmackcardigan… using the hashtag will help pull up pictures and not posts about the pattern 🙂

Now we’re finally ready to begin!

*Cutting fabric- It is important to cut your pieces along the grainline of the fabric. Grainline is easily found parallel along the selvage of the fabric (the sides that are not cut by the store). You want to match your selvage/grainline to the grainline arrow on the pattern piece. Making sure this is straight is important! If it is cut off grain/not straight it will hang not straight! Have you ever had a pant leg/sleeve/shirt always twisting while you wear it? That is because it was cut off grain! It’s really annoying! So take your time matching the grainline on both woven and knit fabrics.

*Cut chart- I include a cut chart for any rectangle pieces. The measurements for the cut chart are located in the first few pages of the tutorial and on the pattern pieces. This way you can cut your rectangle pieces without having to look up the tutorial :).

I prefer to use my cutting mat, quilters ruler and rotary cutter for cutting rectangle pieces. If it has a longer measurement I prefer to fold in half and cut on the fold for ease as well. Again, make sure you are keeping your grainline straight.

*Direction of Stretch- I also include a direction of stretch arrow on all pattern pieces for knit garments. It is always perpendicular to the grainline. Even with 4 way stretch fabric the greatest amount of stretch will run horizontally on your fabric. If it is on the fold, fold your fabric selvage (the part not cut by the store) towards the opposite selvage as wide as your piece and place on fold.

*Using a Stretch Stitch for Knit Garments- Since most of my patterns are for knit/stretch fabric I thought I would add available stretch stitches you can use. I use a serger in the tutorial, this is a great machine stitch for stretch fabrics if you own one. Basic sewing machine stitches that also work are a) triple stitch, b) lightening stitch c)honeycomb stitch d) overlock stitch e) stretch overlock stitch-this is my personal favorite usually- f) double overlock stitch –if you read your manual they will list the stretch stitches your machine have. If you don’t have or can’t find your manual you can always google for your manual! It is very valuable to have! 🙂

I hope these tips are helpful for first time users! You can always post other questions to the P4P FB group and don’t forget to share your final garment!

Mash Up

August 5, 2015

So you LOVE the loose a-line fit of the Free Spirit Tank, but would love it with sleeves?

Here is how you take the Layer Me Up Shirt to add sleeves 🙂

First… grab both patterns, some tracing paper and a pencil.

Trace your size of the Free Spirit Tank.

Place your Layer Me Up – SLEEVED BODICE piece matching on fold and at the top shoulder. Make sure you’re matching the front with the front 😉

Don’t worry about the neckline, although if you wanted it higher/tighter you could trace off the neckline from the Layer Me Up 🙂 Now just trace the armsyce from the Layer Me Up.

Repeat with the back pieces!

Now you can use any sleeve option from the Layer Me Up Shirt.

Here is mine I made for the fall!

Little guy wanted in 😉 Please excuse the no make up, mom hair, sports bra look!! It’s what I’m sporting most days though! 😉

I can’t wait to pair it with some leggings for the fall and winter! 🙂 It will be perfect right after baby girl comes!

Boundless Nursing Mod

August 5, 2015

I had lots of inquiries about nursing option for the Boundless Knit Dress. I know ladies love to create items they can wear during and after pregnancy! Since the Boundless has a lined bodice it is a super simple modification to do! Here is how I did mine 🙂

I cut out all my pieces normally- main fabric bodice, lining bodice, sleeves, skirt, and I did pockets for this one too! I did a mini length and didn’t add my 3″ I should for being super tall because I wanted a tunic length! I wear tunics and leggings much more then a dress 🙂

Choosing fabrics: I choose a spandex blend for both since the main fabric would be pulled and stretched a lot, you want it to have good recovery and not get stretched out and sloppy by the end of the day! The lining I choose a true spandex. I thought it would be soft on my skin, stretch nicely with the changes throughout the day of your bust measurement and be sturdy enough to do well with cut outs. I also choose a solid b/c it when you lift up you will actually be showing the wrong side of the fabric. You COULD sew the lining were a print shows, but you might make your brain very tired trying to figure it out 😉

You can follow the normal directions in the tutorial all the way through the bodice and skirt construction. ATTACHING the skirt is where we will change it up a bit! 🙂 ***Although, after creating mine I SHOULD have put right side of bodice to WRONG side of lining–this way the sides seams wouldn’t show when you pull up!***

Here is my bodice, again put together just as the directions say in the regular tutorial. For the main bodice fabric I choose to hem with an elastic hidden in the hem. I would’ve use a clear elastic if I hadn’t been all out 😉 so I used what I had! I measurement the finished bodice and cut to that size. I did not add for a seam allowance b/c I want to stretch it EVER so slightly with attaching.

Sew the elastic ends together creating a circle.

Now, I TOTALLY messed up here with pregancy brain, but didn’t want to unpick it! lol… so bare with me with this picture that is wrong! You want to baste the elastic stretching it EVER so slightly (I mean just barely) to the wrong side of the bodice edge. See my mistake 😉 I did right side lol!

Fold under and hem with the elastic enclosed in the hem. (Mine was obviously not enclosed b/c I messed up!)

Now for attaching to the skirt. I recommend using the “Traditional Gathering Method” for the skirt since there is elastic in the bodice, it might start getting bulking with elastic also in the skirt! Attaching the top with right sides together, but only catching the lining. The main bodice piece will be free.

Now you can try on and mark/make cut outs in the lining. I used my handy pen that disappears with a hot iron! I didn’t take pictures with the cut outs 😉 I’ve been asked several times what shape I cut out. I just did a horizontal slit below the apex (fullest part) of my bust. I thought it showed through the least that way. I just opened up the slit to use it.

Here is my finished nursing tunic from the Boundless Knit Dress!

And some with Little Guy sneaking in the action of course! He’s showing off his new toy! And I LOVE his face in the 2nd one, looks like he’s super impressed with the nursing mod! 😉

Love the pockets and the tunic length 🙂

Tips on sewing with silky fabrics

July 24, 2015

I have two patterns that I suggest using a lightweight woven with a very soft drape (Everyday Elegance Top and the Summer Kimono). I often get asked for “tips and tricks” to working with this kinds of fabrics! So, here is a compiled list of a few tips I have for working with slippery wovens like chiffon, peach skin, rayon, satin, challis, ect.

I think the most difficult part of sewing something up in this fabric is the cutting. I almost always use pattern weights like these:

But with any kind of slippery fabric they’re a MUST! If you don’t have any, use any kind of paper weight, heavy object that isn’t too tall. The silver paper weights are from this Etsy Shop if you’re looking to buy. She has several options in her shop, I prefer the shorter version to be able to get my scissors closer to them! The pink were hand-me-downs from my mama <3.

Some specialty wovens are harder then others– if you’re cutting anything that needs to be precise (collar piece) then I recommend only cutting ONE layer at a time. With something as loose and forgiving as the kimono though, I don’t personally bother with it. 🙂

So, lets get started sewing! I recommend using a nice, new, sharp needle for these.

I also like to tighten my stitch length down one notch to keep away from puckers.

When sewing my BIGGEST TIP is to not OVERWORK the fabric. Although it is a non-stretch woven they will get “wonky” and pull out of shape if you do. Don’t pull or “man-handle” the fabric to make anything match! If your pieces aren’t lining up perfectly it is almost always a cutting mistake (remember I said that was the most difficult part!).

The good thing is most clothing made from these drapey fabrics are loose fitting and forgiving :). Trim and let it go 😉

After I sew, I PRESS. It takes a little more time, but it makes your end product much more professional.

French seams:

I had a lot of questions about using french seams. I don’t tend to care what the inside of my clothes look like a TON. But for nicer items in specialty wovens french seams would be nice. Here is my quick how to:

You will place your pieces WRONG side together and make the first stitch. For my patterns with 1/2″ seam allowances I do the first stitch at 1/4″. Then trim it to 1/8″. I press the seam on both the wrong and right sides of the garment flat, then fold at the seam and press again.

Now with RIGHT sides together and first seam pressed inside stitch again at 1/4″ from fold/seamline. This should enclose your raw edge from the first seam allowance and put you at your 1/2″ seam allowance total for the seam.

Again press from wrong and right sides of garment. I tend to always press to the back. You can top-stitch here if you prefer. I do lengthen my stitch length back out to 3 for top-stitching. Press again 🙂 Do you see an important trend in this? lol!

Hemming:

My prefered way to hem is to serge the edge—- I loosen my tension a tad to fight the puckering.

Then I press the serged edge over twice for a nice even narrow hem. Okay, most the time I don’t press…but you SHOULD press, I can hear my mom telling me to take my time and press every time I don’t 😉

Now I DO press after EVERY TIME! I see a lot of seamstresses complain their hems are “wonky” on specialty wovens, two things cause this- over working your fabric/pulling it as you sew and not pressing! A good press after can really change the way your hem looks!

I got asked to show how to hem without a serger; so here is how I hemmed without a serger. I pressed WITH LOTS OF STARTCH (don’t be scared to use some or lots 😉 ) a 1/2″ to wrong side.

Then I opened the 1/2″ hem and folded the raw edge to the fold line. This creates a 1/4″ narrow hem fold. Press again.

Tada! You can sew with specialty wovens! The biggest tips are: cut carefully, don’t pull your fabric as you sew and press, press and press again 🙂

Tips and Tricks on How to Up-Cycle Jeans/Denim

June 13, 2015

Making jeans can be a little intimidating for some… and we’ve already had a post here about making jeans look more like store bought jeans with details like top-stitching thread and distressing.

But, a really easy way to get your jeans looking professional is to use an old pair that an adult is throwing/giving away! This means a lot less work for you distressing and top-stitching if you’re smart about laying out your pattern pieces! So here it goes…my tips on using pre-existing jeans:

1- Making a few cuts along the seams can really make cutting your pieces much easier! I like to cut along the inside legs/crotch, cut off the waistband and beltloops, and the back pockets.

2- Be cautious about distressed/washed jeans and laying out your pattern pieces… meaning, if your jeans have a very obvious fade/wash/distress pattern on them then you need to make sure you like where it will be placed and that it will match when you sew up your jeans. For this pair, I wanted the distressed area of the original jeans, so I laid my patterns around that. Notice that my two pieces are very close to the same area horizontally, and that the back yoke is placed above the back piece. All of this will ensure that the distressing and wash look natural on my finished jeans.

You can also use the original hem line if you prefer to get that instead. Remember to account for hem allowance. I did that with this pair, because my jeans didn’t have a very noticeable distressing.

Use the back pockets when cutting your new pockets, Remember to account for the hem allowance at the top.

If you’d like to use the waistband and belt loops you can…. but warning, unpicking those belt loop stiches is not fun 😉

If you pattern calls for elastic in the waistband, like my Cpt. Comfort Jeans, then you will have to cut a slit on the wrong side of the waistband to slip your elastic through- I just use a wide zigzag to mend the slit after (I hide the zigzag stitches behind a belt loop!). Make sure when overlapping that you line up your jeans button and button hole, you can see here on mine they overlapped much more then the pattern called for. Then you will tack down the bottom of the belt loops 🙂

3- Now that you have your pieces cut you will continue to sew them just like the pattern calls for matching the store bought top-stitching thread as best you can. And although they have a wash and distressing, I STILL distress along the way! That way my finished jeans will have the distressing where store bought jeans do, like along pocket lines.

Now you have a great fitting (no plumbers crack!) pair of jeans that cost you nothing but the thread and time <3 and plus they look amazing!

How to Sew “ready to wear” looking Jeans/Denim

June 13, 2015

Jeans can be an intimidating sewing task, but they really aren’t that difficult and it is so great to have well fitting jeans for you or your little ones! No more plumbers crack when bending down!!!!! 😉

With my recent release of the Cpt. Comfort Jeans I wanted to post about how to distress your new denim to look more like ready to wear jeans! I personally LOVE the distressed look! Although a super clean dark denim can look nice as a “dressy” pair of jeans like here:

But for everyday, I just love the little distressed look… something about looking like Daddy gets me every time with my little guy!

So, lets get started on those great store bought look jeans!

You really MUST use a top-stitching thread for all your top-stiching if you want store bought look… I scoffed at my Mom the first time she told me it was a must… BUT she was right, like always!!

You will use this heavier/thicker weight top-stitching thread in the top only and for top-stitching only. You will use regular thread in the bobbin and for all seams sewing the jeans together– yep, you have to rethread a lot ;). But it is absolutely worth it if you want ready to wear looking jeans! I promise!

You will also NEED a bigger needle designed for heavy weight fabric like denim or you will be breaking needles on those thick belt loops!… here is a single and double needle:

Now, I only have one machine, so there is A LOT of switching threads and needles if I use the double needle. So, I will often just sew two lines with my single needle instead of switching to my double needle 😉

Now for the distressing, you will need some sandpaper! To be honest, I’m not sure the BEST kind of sandpaper to use… I asked my husband if he had some and used whatever he handed me 😉 Here is a shot of the kind I happen to use!

The trick to distressing your denim is to do at WHILE you’re sewing the jeans! If you try to do it before it’s hard to gauge where the distressing needs to be. If you do if after you’ve top-stitched them then you will be breaking your top-stitching threads (ask me how I know that one 😉 ) see left top pocket with it’s broken threads :/ oops!

So, I suggest sewing the jeans together with your normal thread, then distressing with sandpaper before you top-stitch. Here is my patch pocket sewn, turned right sides out, and distressed along the edges (and any other places I fancied at the moment). Then I top-stitched.

Some areas are harder to distress before topstitching like back pockets, belt loops, any piece that you are top-stitching closed or onto the jean. But I still follow the same steps. I just fold and press, distress, then top-stitch onto the back piece.

So have fun with a little distressing or A LOT! lol! I like a lot 😉 I end up with a mound of blue fuzz all my sewing room by the time I’m done!

Last is the button! I love to use “real” jeans buttons- and honestly, I always have been lucky enough to take them from my loving mother’s stash! But they are very easy to put on, just line up the two parts and hammer away! Yep, you’ll have sandpaper and a hammer in your sewing room for jeans!!

I’ve always used snaps, which are very common on ready to wear for younger children 🙂

Newest Patterns