lace up Archives - Patterns for Pirates

Our newest pajama patterns are just so perfect for the holiday season, aren’t they? So if it’s a party, let’s make it a pajama party with some easy hacks that will add even more options to the Naughty Nice and Sugar Spice PJs you’ll be making.

….

Zipper

Let’s start by switching the front of the Naughty Nice pajamas from a button/snap placket to a fun zipper. Fear not, it’s super easy! I personally find the zipper to take less time than adding all the snaps or buttons. Grab a 9″ zipper and let’s get started.

Sew the pajama as instructed in the tutorial, except for the neckband. You won’t be using the one in the tutorial, you’ll make a new neckband.

Lay your zipper right side down on the front opening. The to of the sipper will be at the curve. Sew it as close to the zipper teeth as possible. Using a zipper foot will make this easy.

Repeat the process on the other side of the zipper.

On the wrong side of the fabric, sew a straight stitch where the fabric and zipper meet and remove excess zipper.

Now that we added the zipper we need to create a new neckband. With the zipper closed measure the neck opening. I like to lay mine flat but you can measure anyway you feel comfortable.

Cut your neckband 85% of the neckline opening plus 1″ for seam allowance by 2.5 inches. Fold your neckband widthwise and round your open edge to resemble a henley neckband. Open then neckband and fold it lengthwise, wrong sides together. Give it a good press and mark the back and the quarter points.

Mark the quarter points on the neckline opening. With the zipper open, pin (or clip) the neckband in place.

Attach the neckband using a stretch stitch. Optionally, top stitch. I actually like to topstitch around the neckline and zipper right now, using a continuous stitch.

All done! You can use the same technique to add a front zipper to the Sugar and Spice PJs too. You will just have to adjust the zipper length.

…..

Lace Up Front

Want to spice up the naughty version or just want some extra fun detail? Instead of snaps or buttons, use grommets/eyelets on the front neckline. Use as many or as little as you prefer. I chose to do 4 spaced about 1.5″ apart. Use drawstring, ribbon, lace or our knit fabric to create the string and lace it up!

…..

Hood

When I was searching for inspiration for my Naughty Nice PJs, I kept coming across hooded versions of this same style pajama. I’m not sure how comfortable a hood would be to sleep in, but to have a little extra coziness around you while you’re lounging around? Sign me up! Plus, I think this pattern will translate so amazingly well for costumes next Halloween, and a hood is always a good thing to be able to attach for those as well.

You can use your favorite hood piece from any pattern. I chose to use the Women’s Henley hood piece.

Assemble your hood piece like you normally would. I chose not to line mine and hem it instead.

You’ll need to take two measurements:
— The width of the bottom edge of your hood, where it will attach to your PJs.
— The full length of the neckline + placket opening.

You won’t be using the neckband piece that comes with the pattern. Instead, you’ll need to do a little more math.

(Neckline Opening Measurement – Hood Width Measurement) / 2 + 1″ Seam Allowance

This will give you your new placket piece length. You’ll want two of them, for either side of the openings.

With your placket pieces folded in half (wrong sides together), pin it along the front placket opening and stitch. Repeat with the second placket piece on the opposite side. Follow the instructions just like the Naughty Nice / Sugar Spice patterns call for, to finish the bottom of your placket pieces.

With right sides together, align your hood piece along the raw edges of the neck opening. Pin and stitch. You’re done!

…..

Leg Placket

The last easy hack we wanted to show you is geared towards the Sugar and Spice. We all know how changing a bitty’s diaper can be difficult when they get all wiggly, especially in the middle of the night. So I wanted to show you how to add leg plackets to make changing a little easier.

Make the pajamas as instructed in the tutorial but do not stitch the inseam. Instead, add the cuffs flats, right sides together.

Once you add the cuffs, your pajama legs will look like this.

Open the PJ legs and measure the front and back inseams.

Cut two strips of fabric and interfacing that will be the measured length plus 1″ by 2″ width. Add the interfacing to the placket, fold and press lengthwise.

Fold the placket pieces right sides together and sew a stitch along each short end. Use a 1/2″ seam allowance. Cut the seam allowance to about 1/8″ and turn outside out. Press.

Pin each placket strip to the leg opening, making sure you match the front placket to the front opening and the back placket to the back.

Stitch in place and top stitch. If you used a serger to add your plackets, take a look over this blog to see how to finish the serger tails.

All you have to do now is add your snaps. Space them about 1 – 1.5″ apart from each other.

All done! Now you have easy diaper change Sugar Spice Pajamas!

There you have it, 4 easy hacks to give your pajamas even more options! We can’t wait to see what your Naughty Nice and Sugar Spice Pajamas will be. Post your creations in the P4P group!

Alex, Nicole and Katy

Lace Up V-Neck:

As if the Favorite Tee was not amazing enough, we have a few easy hacks for it that will make you want to sew even more of them. The first time I saw a lace up V-neck shirt on Pinterest I knew I had to make myself one so I will show you how easy it is to get the look by using the Favorite Tee pattern. You will need the pattern printed and cut in your size (use the V neck option), a little bit of interfacing, 10 grommets and some cord.

Favorite Tee dress option (lengthen 1.5″ in the front and unhemmed)

Start by adding some tricot or light weight interfacing to the V neck band. Cut 2 strips of interfacing about 7 inches long by the width of the band. Cut out the V at one end and iron the interfacing to the neckband.

Sew the shirt or dress as per the pattern tutorial. I chose the dress because you know…one can never have too many dresses. You can certainly do this neckline with either one of the shirt length too. You will now need to mark the grommets location.

You can measure about one inch up on each side of the V band starting with the front center seam. Mark that spot. Keep adding a mark every one inch up on each side. I used 5 grommets on each side.

There are different size and color eyelets that you can use. I went with a brown/copper-ish finish for mine because I liked how it looked against the marble fabric.

ohhh the choices 🙂

Follow the manufacture instructions for adding the eyelets. I know there are more expensive devices out there but I am very pleased with my $1.50 Dritz eyelet tool so that’s what I used.

For a more edgy look you can make a faux leather binding and thread it through the eyelets.

You are almost done. All you have to do now is lace up the neckband with a cord. You can use parachute cord, or faux suede cord like I used for my final pics or you can make your own. Tadah! You have just created your very own Pinterest worthy lace up Vneck shirt or dress.

Favorite Tee dress length (1.5″ longer in the front than the pattern and not hemmed)

Curved Hem Lace Insert:

Adding lace to your finished garments is a fun way to add some extra sweet details. You can use a lace applique, or in this instance, I used a scalloped edge mesh lace. I chose the curved hem but you could use the other side split hem options if you’d prefer. Print, cut and assemble your pattern as usual. I wanted the curved hem to start a little higher on my hip so adjusted the length of the side seam. I stopped about 6″ from the bottom of the side seam.

Since I stopped higher than the original side seam, my curve ended up looking a little funky, so I trimmed the edges to make a nice clean curve.

Hem using your fabric stretch stitch. (Need some tips on hemming a curved hem? Check out Alex’s post HERE)

Next, open up your side seam and place your applique right side up to the wrong side of your main fabric. Position as you wish and top-stitch in place. *Note – be sure to measure your pattern piece from the curved hem line to side seam and make the applique at it’s widest point a similar measurement (near the bottom hem). Otherwise, you may loose some ease at the hip.

Trim the applique or fabric if needed.

High Side Split Hem:

The side split hem for both shirt and tunic lengths is a fun detail on it’s own, but we thought we’d take it up a notch (no pun intended 😉 ) and make those slits sky high. Ok, so maybe not that high but we did take them up quite a bit. Using the average 8″ side waist measurement (based on a 5’5″ frame), construct your pattern as instructed but stop your side seam stitch at 8″ below the armpit. Finish the side split as noted in the pattern. Easy Peasy and no added steps or items needed!

This pairs perfectly with our Cross my Heart Cami to show off those layers.

Or, leave it un-layered and open with a high waist Pirate Pencil Skirt or some skinnies. Either way, you’re sure to be on trend.

Convinced you need the pattern yet? The Favorite Tee is loaded with options and these simple hacks/mods give you that little extra to start filling up your closet without the worry of having too many duplicates. I know they’re our new Favorite Tee 😉

Naughty Nice + Sugar Spice PJs :: Easy Hacks