Patterns for Pirates

P4P stylish, modern, wearable patterns

  • Home
  • Blog
    • Frequently Asked Questions
    • Pattern Releases
      • Free Patterns
    • P4P University
      • Fitting
      • Sewing with Stretch, Knit Fabrics
      • Sewing with Woven Fabrics
      • Sewing Machines
    • Sew-A-Longs
    • Fabric for Pirates
    • Pattern Hacks
    • Announcement
      • Blog Tours
      • Contest/Giveaway
  • Shop
  • Bundle Discounts
  • Flash Friday
  • Gift Cards
  • My Account
  • Cart

Loggers Ruched Side Hack

April 24, 2019

Hi Pirates!  With warmer weather approaching, pool days, lake trips and beach-bound vacations ahead,  we’re starting to pull swim knits from our stashes and make new suits for the summer.  We have Rachel from Yonder Couture on the blog today as a guest writer to share with you the latest hack to the Loggers. In case you missed any of the others (including a fully lined swim option), check it out HERE.

Now, here’s Rachel!

I didn’t expect to totally fall in love with Patterns for Pirates latest release, the Women’s Loggers, but P4P knocked it out of the park again with a design loaded with options.

{ICYMI, Loggers are the love child of leggings and joggers…}

After making a pair of loungewear shorties and a pair of full-length pants from the pattern, I couldn’t shake the vision of swim shorts for paddle-boarding.

I had a load of swim fabric on hand already. My pattern was already assembled from my previous makes. An opportune hour of free time smiled my way. Before I knew it, I had these adorable new shorties in my life.

{No cats were harmed in the making of these Loggers.}

I wasn’t prepared for the overwhelming reception by the amazing P4P community of sewists. Many asked for the pattern hack.

So, here we go! Let’s make swim shorties!

  1. Cut the pattern pieces per the pattern instructions.
  1. Cut two additional strips of fabric, 1.5″ x 36″. These will be your side ties.
  2. Sew together each of your center seams, leaving the outside leg seams open.

 

  1. Fold and press your leg bindings in half and attach to the bottom of leg openings. Be sure to match your center points on the binding and legs. The center point of each will not line up at the center seam.
  1. With right sides together, sew a 5/8″ seam along the outside leg seams and press open. Do not use a serger for this step. You are creating casings for your side ties.

I chose to finish my raw edges with a serger, but this is not required.

  1. Create a casing on each side of each outside leg seam by sewing a 1/2″ seam. This will secure the edges and provide a new home for your side ties.

 

  1. Create your ties by sewing the right sides of your fabric strips together. Turn to the right side with your favorite turning tool. Cut each strip in half so that you have four ties.
  1. Insert one tie into each casing and secure the top edges in place with a basting stitch.
  1. Attach your choice of Logger’s waistband options per pattern instructions.
  2. Once you try on and ruche or gather the edges to your preferences, tie a pretty side bow and cut the tie length to your liking!

 

And you’re ready to have the cutest booty on the lake!

If you have any questions, please feel free to reach out to me. I’ll be happy to help.

One last note… if you post your makes to social media using the hashtag, #loggers, be prepared for a rash of unusual new followers who cut down trees for a living.

True story.

 

Shout out to Rachel for sharing her hack with us!  If you’ve used one of the hacks on the blog for the Loggers, be sure to tag us on Instagram or share your pair in the Facebook Group!

Filed Under: Pattern Hacks 2 Comments

Loggers – easy hacks

March 12, 2019

The new P4P Loggers (available in women and youth) are here! Needless to say the P4P team and blog contributors were very excited to show you these easy hacks that you can do to the Loggers in order to have even more options. Let’s get started!

…..

Peg Waistband

First comes the Pegs. Then comes the Logger… Up next, a Peg and Logger mash made in Heaven! Ever since the release of the Peg Leg add-on pack, I have been obsessed with the contoured waistband (What? You haven’t tried it yet? Grab a copy of it for FREE right here). Luckily, the Logger Pattern is another perfect way to show off and use the contoured waistband.

To create this look, you will need both the Logger and the contoured waistband pieces. One of the advantages to the Loggers is that you can use fabrics with just a small amount of vertical stretch. However, for the Pegs, 50% stretch is needed in both directions. So when choosing your fabric for the contoured waistband, it is KEY to make sure that it meets these requirements or else it won’t fit!

Begin by cutting out the necessary pieces. For the waist on your Logger, cut on the lower rise. As you can see in the picture below, I have have my Logger shorts with bands and then my pieces needed for the contoured waistband.

Next, assemble all pieces as written in the tutorials, including the waistband. Quarter both your Loggers and waistband. Slip your waistband over the Loggers, matching right sides together.

Attach your waistband, being sure to stretch the waistband only and NOT the Loggers. All finished! You have now created one of the most comfortable pair of pants with the most comfortable waistband that you will ever own! ~Erinn

 

…..

Capri Loggers

The Loggers patterns include 2 length, ankle and shorts. So let’s add a third. I personally love capri length leggings and joggers when biking so I knew I needed capri loggers too. Such an easy hack!

All you have to do is remove some length on both leg pieces. For the adult loggers I recommend removing about 7″ but you can go a little less or a little more. If you are not able to measure them you can use the Peg Legs capri length as a guide, just remember that the Pegs are hemmed while the Loggers have cuffs so make sure you accommodate for that.

Once you cut your fabric continue sewing them as per the tutorial. The only change left to do is in the cuffs width. Measure the leg opening and multiply that by 0.90 and add 1″ for the seam allowance. Keep the height of the cuffs pattern as is.

All you have left to do is add the cuffs to the legs following the same instructions in the tutorial. As always, press, press, press!

Shhh! Want to know a little secret? For my pair of capri loggers I actually used the exact cuffs from the pattern. Since my loggers are 100% cotton spandex with great stretch and recovery I could do that. Something to keep in mind, but do not do this if you are using French Terry or other knit with not so great recovery.

That’s it! Super easy, capri loggers to add to your lounging or workout gear.

…..

Swim Bottoms

The shorts version of the Loggers makes for the perfect swim short!  I used the youth version here for my girl but you can easily do the same for the women’s.  Construction is more or less the same, but I chose to line them with swim lining and did elastic vs the bands.  You can also adjust the inseam to your preference if you want them a little longer as they will finish a tiny bit shorter if adding swim elastic, or even keep the bands as shown in the original pattern.

Cut 1 Main, 1 Lining and 1 waistband. I used 1/4″ swim elastic cut 1/2″ shorter than the measurement in the pattern for the bands. (I would recommend, measuring the leg openings and cutting the elastic 80% as swim will expand in water)
Sew up each pair of shorts (1 main and 1 lining) separately as show in the tutorial.
Turn main right sides out and lining wrong sides out. With wrong sides together slip lining into main shorts.

With right side of waistband to right side of shorts, attach your waistband (as shown in the tutorial). You will sew through 4 layers (1 lining, 1 main and 2 for your waistband.) Tip: Baste around the waist opening of the shorts to keep the layers from slipping and treat as one fabric.
Overlap the ends of the elastic and stitch with a zigzag stitch, creating a circle.
Baste around the leg openings to keep the lining and main fabric from slipping.

Mark halfway points on elastic and shorts. Pin or clip elastic to the wrong side (lining side) of the shorts matching halfway points.
Aligning raw edges, stitch elastic to shorts. If using a serger, do not cut off any fabric.the elastic will butt up to the raw edge of the fabric.
Fold elastic to the lining side of the shorts and top-stitch using your favorite stretch stitch. Tip: I like to use a narrow zigzag for swimwear.


…..

Grow With Me Loggers

One of the hardest things about sewing for our kiddos is how fast they outgrow items we spend hours making.  Well, here is a quick and easy way to make your little one’s Loggers last a bit longer.

You’ll start off by choosing the next size up for your pants.  Now print and cut out your pattern pieces making sure to use the yoga style waistband. I went with a low rise for this set but you can choose high rise as well.

Now go ahead and grab your ankle cuff piece because we are going to be doubling the height of that.  I did this by first tracing it on to a blank piece of paper. Then you’ll place it alongside your line edge shown in red so it’s doubled in size but still has the same fold line.  Tape it down and then cut out the entire piece as one shown by the green line.

Now cut all your fabric pieces out just as directed!

From here you’ll sew up exactly how it’s said to in the tutorial.  When it comes to wearing you simply roll the bands to best fit your child. Here is an example of it fully rolled and extended. As you can see my little needs it fully rolled but now she’ll be able to wear them much longer!

Don’t forget to share your creations in our facebook group! We can’t wait to see all your makes!

Michelle

Now that you purchased your Loggers and reviewed all of our easy hacks, time to start sewing. Make yourself or a loved one a pair and don’t forget to show it off in the Patterns for Pirates Sewing Group on Facebook. 

 

The P4P blog team! 

Filed Under: Frequently Asked Questions, Pattern Hacks, Pattern Release, Uncategorized 3 Comments

Loggers :: New Pattern Release!

March 12, 2019

What do you get when leggings and joggers get together and make a baby?  LOGGERS!!

Today is like Christmas and my birthday all wrapped up into one because we are bringing you two brand new patterns that I think you’re really going to love: Loggers and Youth Loggers!These patterns are drafted for a stretch knit fabric with a 40-50% horizontal stretch, and you will want some vertical stretch for wearing comfort.  Both the adult and youth versions feature a tighter pant with cuffs and optional pockets on the pant length.  They are drafted in two lengths (shorts and pants), a large size range (XXS – Plus 3X in women’s and 3M – 14 in youth), have two rises (high and low), two waistbands (short or tall/fold over yoga) as well as an optional drawstring.

Loggers wear like a jogger but look like a legging.  Everything is finished with a band, meaning there is no hemming required.  And they are perfect for lounge wear, workout gear, swim cover-ups, layers under dresses/skirts, and everything in between.


**Want to learn more about how to measure yourself for this pattern?  We’ve got you covered with an in-depth blog HERE.  And in case you’re new to Patterns for Pirates and PDF patterns in general, we have a great blog full of new user tips HERE to help you get started!  As with all of our current releases and updates, the pdfs now include our layers feature and can be found in Letter, A4 and A0 sizes.  And for even more helpful fun, we have a *free* printable that you can use to help record your measurements as you take them.

Let’s take a quick look at the different options!

PANT LENGTH W/CUFFS

SHORTS LENGTH W/BANDS

SHORT + TALL/FOLD-OVER YOGA WAISTBANDS

OPTIONAL PATCH POCKETS + DRAWSTRING

Are you ready to get in on the logger fun?  Go grab your pattern(s) now!

LOGGERS | YOUTH LOGGERS | LOGGER BUNDLE

Need more convincing?  Just take a look at this pattern on all of the amazing shapes and sizes of our testers, and get a look at more examples of all the options in our albums in the P4P Facebook group! Logger Album | Youth Logger Album

And if that didn’t give you enough options, make sure to check out the hacks post to help take your patterns even further.

The release sale (no code needed) will be through Sunday, March 17, 2019 (11:59PM US Central Time Zone).

Happy Sewing, pirates!

Filed Under: Pattern Release Leave a Comment

Featured Patterns

  • Mae Top - Bundle Mae Top - Bundle $20.00 Original price was: $20.00.$18.00Current price is: $18.00.
  • Mae Bottom - Bundle Mae Bottom - Bundle $20.00 Original price was: $20.00.$18.00Current price is: $18.00.
  • Loosey Goosey - Bundle Loosey Goosey - Bundle $20.00
  • Bacall Bodysuit Bacall Bodysuit $12.00
  • Privacy Policy
  • Refund Policy
  • Affliliate Program
  • Contact Us
  • About

Copyright © 2025 Patterns for Pirates

Copyright © 2025 · Genesis Framework · WordPress · Log in