Patterns for Pirates

P4P stylish, modern, wearable patterns

Cozy Wrap Sew Along – day 5

Welcome to day 5 of our Cozy Wrap sew along. Today is probably my favorite day because I get to make those cute, trendy gathered sleeves. The pattern includes a banded short sleeve, a cuffed regular sleeve and a gathered one. 

If you opted for short sleeve, you will create the bands by sewing each one right sides together to form loops. I highly encourage you to pre-press the cuffs wrong sides together before creating the loops. Just like we did the past few days. 

The standard long and gathered sleeves are attached in the round. That means you are sewing the side seams of the sleeves first. Matching the armpit seam to the sleeve side seam, attach the sleeves to the opening. If you opted for the gathered sleeves, you need to run a gathering stitch or two at the wrist. Pull the gathering threads so that the opening matches the cuff. I personally love gathering with my serger. Our P4P University Gathering blog covers a few gathering methods. 

To attach the cuff, simply match the cuff seam to the sleeve seam and sew right sides together. We have a tips and tricks P4P University cuffs 101 blog that I encourage you to check out. 

We are so close to finishing! All we have left to do is create the waist tie tomorrow. You can see today’s video below. Check in with your progress in the comments of day 5 photo of the Cozy Wrap sew along album. 

 

Cozy Wrap SAL day 1 | Cut fabric

Cozy Wrap SAL day 2 | Sew shoulder and side seams

Cozy Wrap SAL day 3 | Add bottom bands

Cozy Wrap SAL day 4 | Add neckband

Cozy Wrap SAL day 5 | Add sleeves

Cozy Wrap SAL day 6 | Add waist tie

Cozy Wrap SAL day 7 | Winners announcement  

Cozy Wrap Sew Along – day 4

Welcome to day 4 of our Cozy Wrap Sew Along. Easy day today! All we have to do is add the neckband…the very long neckband. You should have two narrow long strips of fabric (do not mix them up with the tie pieces!) Sew them right sides together on one end so you have an even longer neckband. 

Fold the band wrong sides together and give it a good press…just like we did yesterday! Unfold it and fold each end right sides together, sew  and re fold wrong sides together. You should not have a neckband with no raw ends anymore. Time to pin it to the neckline and front raw edge. I recommend pinning the center seam to the center back of the neckline first. Proceed with pinning each front raw edge to the band, right sides together, without stretching the band. The only part of the neckband that will be slightly stretched to fit it’s between the two shoulder seams. 

After you serge the neckband on, you need to finish the serger tails. I cover a few ways to do that in this P4P University blog. 

You can see in today’s video how I attach the neckband to my tunic Cozy Wrap. When you finish adding the neckband, give it a good press and add a picture of your progress to the comments of Day 4 photo. 

Cozy Wrap SAL day 1 | Cut fabric

Cozy Wrap SAL day 2 | Sew shoulder and side seams

Cozy Wrap SAL day 3 | Add bottom bands

Cozy Wrap SAL day 4 | Add neckband

Cozy Wrap SAL day 5 | Add sleeves

Cozy Wrap SAL day 6 | Add waist tie

Cozy Wrap SAL day 7 | Winners announcement  

Cozy Wrap Sew Along – day 3

 

Good morning, pirates! What a wonderful start to the sew along it has been! Today we add the bottom bands. All Cozy Wrap lengths have the same bottom finish. The most important tip I can give you for today’s steps is to start by pressing all 3 bottom bands. Fold them wrong sides together along the length and give them a good steam press! This will help tremendously when you attach them to the bottom raw edge.

Unfold the back band and sew each side folded right sides together. Turn the band out! See how easy that was now that it was pressed. You’ll repeat this steps for the two front bands, except you will only be sewing on one of the sides for each, not both. 

The bottom bands are cut at 1:1 ratio to the raw edge of the top so you will not be stretching them to fit. You can sew these steps with a sewing machine or a serger, just remember to keep a constant 1/2″ seam allowance. All you have left to do is give your stitches a good steam press to reduce any waviness from sewing.

You can see today’s steps in the video below. Remember to take a picture of your progress and post it in the comments of day 3 Cozy Wrap sew along album.

See you back here tomorrow!

 

Cozy Wrap SAL day 1 | Cut fabric

Cozy Wrap SAL day 2 | Sew shoulder and side seams

Cozy Wrap SAL day 3 | Add bottom bands

Cozy Wrap SAL day 4 | Add neckband

Cozy Wrap SAL day 5 | Add sleeves

Cozy Wrap SAL day 6 | Add waist tie

Cozy Wrap SAL day 7 | Winners announcement  

Cozy Wrap Sew Along – day 2

Let’s start sewing! Today we stitch the shoulder seams and side seams. If you are making the midi length and your fabric has lots of vertical stretch I encourage you add clear elastic the shoulder seams. It will help prevent any stretching during wear. I am using a waffle knit with minimal vertical stretch for my tunic Cozy Wrap so there is no need for shoulder reinforcements.

Once the shoulder seams are done we sew the side seams. Yes! This Cozy Wrap pattern has the sleeves added in the round so we will do that in a couple of days. For the side seams you must use your sewing machine as well. Remember, the whole pattern can be sewn with a sewing machine (using stretch stitches). If you chose to use the serger, like I have, you do need to stitch part of the side seams with the sewing machine to ensure a nice clean finish. You can see in the video below achieved a beautiful side seams going between my two favorite machines. 

Once you finish today’s steps, post a photo of your progress in the comments of the Day 2 photo of this sew along’s album. You can find the album (and lots of new sewing friends 😉) here, in the SAL group.

 

Cozy Wrap SAL day 1 | Cut fabric

Cozy Wrap SAL day 2 | Sew shoulder and side seams

Cozy Wrap SAL day 3 | Add bottom bands

Cozy Wrap SAL day 4 | Add neckband

Cozy Wrap SAL day 5 | Add sleeves

Cozy Wrap SAL day 6 | Add waist tie

Cozy Wrap SAL day 7 | Winners announcement  

Cozy Wrap Sew Along – day 1

Welcome to the Cozy Wrap Sew Along!

Happy New Year! I’m so excited to start our 2021 sew alongs with the Cozy Wrap top. The pattern comes in Youth and Adult and you purchase the bundle and save. Don’t forget the Cozy Pants if you’re looking to pair your top with a new bottoms.  If you are still undecided which style to make, our Round Up blog will give you an overview of all options included, from sleeve styles to top lengths. You can also use the Easy Hacks blog for added options.

Let’s start by taking the measurements needed for the best fit. P4P has an amazing blog that gives you tips for accurately taking your measurements. You can read all about it here. If your measurements put you in a different size for chest/waist/hips be sure to check out our P4P University blog and grade to achieve the perfect fit. Our most recent patterns include videos as well. On page 3 you will notice an active button that will take you to the video about adding or removing length. Please refer to it if you are taller or shorter than 5’5″.

 

Still debating which knit type will work best for your desired look? Take a look over our P4P University Knit Types blog. We also included a cheat sheet that you can print. If you are like me and sometime are just keen on using a specific print for a specific pattern, read our Different fabric, different fit blog post before you cut your fabric.

The Cozy Wrap patterns includes a shirt, tunic, knee and midi length as well as short sleeves, long hemmed sleeves and gathered sleeves. This pattern is drafted from light to medium weight fabrics with 20-30% stretch. The Cozy Wrap can be worn both as a wrap or as a cardigan. For my Cozy Wrap tunic I will be using January’s Fabric for Pirates.  Fabric for Pirates is this sew along’s sponsor so our winner will get to enjoy their very own January box!

Day 1 video is posted below. I have used the projector file . Once you cut the fabric, post a picture of your pretty pile in the comments of DAY 1 photo of the Cozy Wrap album in the M4M & P4P Sew Along Group.

Cozy Wrap SAL day 1 | Cut fabric

Cozy Wrap SAL day 2 | Sew shoulder and side seams

Cozy Wrap SAL day 3 | Add bottom bands

Cozy Wrap SAL day 4 | Add neckband

Cozy Wrap SAL day 5 | Add sleeves

Cozy Wrap SAL day 6 | Add waist tie

Cozy Wrap SAL day 7 | Winners announcement

Go To Jacket – SAL day 5 (sew neckband / hood)

It’s FRIDAY!! On our 5th sew along day we’ll be attaching the neckband for the bomber style jacket or the hood for the hooded one.

The Go To Jacket hood features a center panel which makes it great for mixing and matching fabrics too. If you’d like to add a leather accents to the hood, you can follow the steps in the Go To Jacket hacks blog post.

TIP: If you like the look of the drawstrings and want to add them to the younger kids’ jackets, go for a FAUX DRAWSTRING. Simply cut two 5-6″ pieces of cord and tie a knot at one of the ends. Pull the other end through the drawstring hole and tack it down in the lining. Repeat with the other side. Done! Now you have the look of drawstrings without the safety concern of a real one.

Watch the video below for a visual step by step of the hood construction.

If you decided to go with the very trendy bomber style then all you have to do is press the neckband in half lengthwise, wrong sides together and attach it to the neckline opening. It is very important to remember to attach the neckband 3/8″ away from the front opening, on both sides!

Once you’ve added the hood or neckband post a picture of your progress on the day 5 photo comments of the Go To Jacket SAL album.

Go To Jacket Sew Along

Day 1: Print + Cut Pattern

Day 2: Choose + Cut Fabric

Day 3: Sew Pockets

Day 4: Sew Shoulder Seams + Attach Sleeves

Day 5: Attach Neckband / Hood

Day 6: Add waistband + Finish Sleeves

Day 7: Add Zipper

Day 8: Recap + Catch Up

Day 9: Winners Announcement

Favorite/Fav Tee SAL – day 6 (add neckband)

We made it to the last sewing day! Hooray! Today we’re adding the neckband, pressing and showing off our creations. My favorite part! 🙂

If you chose the scoop neckline, take a look over our P4P University Neckbands 101 before you start sewing. The blog includes a video of the Favorite Tee as well. If you picked the V neckline like I did, check out our P4P University V-neckbands 101 and the video below.

How easy was that? All done! You all did great! Now show off your work in the groups and don’t forget to post your final picture in the comments of the day 6 photo of the Favorite /Fav Tee SAL album. The P4P/M4M team will pick the two lucky winners on Monday and we will announce them here on the blog.

Favorite Tee & Fav Tee SAL

Day 1: print + cut pattern

Day 2: chose + cut fabric

Day 3: shoulder seam + attach sleeves

Day 4: side seam + hem sleeves

Day 5: hem bottom or add band

Day 6: neckband

Day 7: winner announcement 

P4P Henley Sew-Along | Attaching Neckband + Hood

Welcome to the day 5 of the P4P Henley sew along. Today’s steps include adding the neckband or the hood.

  • Crew Neckband

If you have done the solid front shirt (no placket) you will now be adding the neckband as in the pattern tutorial. For additional tip, check out our P4P University Neckbands 101 blog and videos here.

  • Henley Neckband

If your sew along choice was a Henley style shirt then you would now be adding the henley neckband. This neckband is not sewn in a loop like the crew neckband was. Take a moment to watch the video below. The most important thing to keep in mind when adding this neckband is to go very slow and baste!

 

  • Hood (with or without the placket)

    The Henley patterns include a hood for the placket option. For this sew along we wanted to show you how easy it is to add a hood to the solid front option. The only pattern modifications you will need to make is to extend the front of the hood by 1/2″.

Sew the hood as per the pattern tutorial. Overlap the front neckline 1/2″ and baste in place.

Mark the quarter points of the hood and the neckline. Turn your shirt inside out and place the hood right sides together, matching the quarter points.

Sew or serge the hood to the neckline following a 1/2″ seam allowance. See how easy it was to add a hood to the plain front shirt?

 

**The links won’t be active until the scheduled date.

January 14: Announcement.
January 15: Choosing Your Fabrics, Printing + Measuring.
January 16: Cutting Fabric.
January 17: Placket.
January 18: Sleeves.
January 19: Attaching Neckband + Hood.
January 20-21: Catch-Up Days.
January 22: Recap + Winners Announced!

5 tips for adding neckbands

So you spent an hour picking the perfect fabric, perfect coordinates and matching thread. You’ve sewn your favorite P4P shirt and you only have one step left…the dreaded neckband. That’s when you start panicking and getting nervous about attaching the neckband and finishing your outfit. Fear no more!

Today on the blog I will give you 5 tips that will help you achieve that perfect neckband you are striving for all the time.

1. Choose the right fabric for your neckband!

Neckbands will be stretched when you attach them, they will be stretched when you put on or take off the shirt, so it is very important that fabric you use for the neckband has great stretch and great recovery. My favorite type of materials for neckbands are cotton spandex, rayon spandex, ribbing and rib knit. You can get away with using some brushed poly as long as the recovery is good. Avoid, scuba, french terry and 2 way poly blends.

 

2. Always cut the neckband cross-grain!

Never cut your neckbands along the grain. Even if your fabric has 4 way stretch (which it should) the vertical stretch is not going to be as much as the horizontal one. If you don’t have enough of the main fabric to cut the neckband is best to use a coordinating fabric than cutting the neckband along the grain.

 

3. Mark the quarters of your neckband and neck opening!

It’s very important that you find and pin (or clip) the quarter points of the neckband and neck opening. After you have sewn the neckband RTS at the ends so you have a loop, fold it length wise and mark where the seam is. This will be the back of your neck band.  The center front of the neckband will be on the opposite side. Now fold it in half bringing the center front and back markings together. The fold will mark your two quarters.

To find the front and back  neck opening centers, bring the shoulder seams wrong side together. Where centers will be where the folds are. Mark them with a pin, a clip or a small snip. With the fabric still laying flat, bring the center front and back together. Your quarter marks will be at the folds. Mark them as well. You will see that the side neck opening quarter marks are NOT at the shoulder seam. The front opening is larger than the back opening.

For all you visual learners, here is a video of the process.

 

 

4. Use the right stitches!

Avoid using a straight stitch when attaching the neckband. As I mentioned earlier, the neckband will be stretched and pulled so you want to make sure the stitches are up to the job. If you are using only your sewing machine, attach the neckband with either a stretch stitch or a narrow zig zag stitch. I prefer to use my serger for this step but it is not mandatory. Once you attached the neckband, press the seam allowance towards the shirt. You will now be top stitching it down with your coverstitch machine or your sewing machine. You can top stitch with a wide zig zag stitch, a stretch stitch or twin needles. Be sure to check out our Twin Needles tips and tricks blog too.

You can see how I attached the neckbands here:

 

5. Press, press, and steam some more!

If you’ve followed the tips I gave you and notice a slight waviness, don’t panic. It’s normal when sewing knits especially if they are on the bias (as is part of the neck opening). Go back to your ironing board and give the neckline a good hefty steam press. Most of the times my neckbands are cotton spandex based and I crank up my ironing machine all the way to the “linen” setting. Make sure you test the heat of your iron on a scrap fabric first. If your shirt is poly based you will need a lower ironing temperature, you do not want to melt your fabric 🙂

There you have it! 5 easy to follow steps to achieve a perfect neckband all the time!

Happy sewing, pirates!

Featured Patterns