Patterns for Pirates

P4P stylish, modern, wearable patterns

Cozy Pants and Wrap – Easy Hacks

Ready to wrap yourself in cozy goodness and cuddle up with those holiday movies and a hot cocoa? I know I am! The Cozy Wrap and Pants are just the perfect addition to your wardrobe. In this Easy Hacks post the P4P blog team is showing you how to achieve more looks using the newly released patterns. Michelle will walk you through adding a yoga waistband to the pants; Dana and Judy are taking the side split “up a notch”…or two. Rachel is bringing her Cozy Wrap up on the fancy chart by making it a dress and Alex is transforming the belt into two sewn-in ties. Let’s get started! 

 

…..

High pants split 

First up, a super easy hack that doesn’t even need any adjustments to the pattern pieces. Have you seen those cool high side split pants all over Pinterest? You can achieve the look with the Cozy Pants. The pattern includes two side notches, one for shorts and one for pants length. All you have to do is use the shorts side split marking for the pants option. Sew the pants just as in the tutorial. 

These style looks beautiful in lighter weight fabric and tied at the ankles. See how easy it was? 😊

…..

Duster wrap with high split

I have had a duster cardigan with a high side split like this pinned on my Pinspiration board for a while, now.  I knew I could make it happen with this really easy hack of the new Cozy Cardi and I love how it turned out!

I have a written blog post below, or if you prefer a video I did one of those, too.  You can find it here:

Cut your pieces out and mark your notches.  In this instance you can see the two pins at the top which mark the notches for the waist tie, and then the pin underneath them is the notch for the shirt length side slit, which we’ll be using here with the midi/duster length cardi to get the look we want. 

Then assemble your pattern as per the tutorial.  The only difference being the side seam will have a much longer hem up to the side split notch than the tutorial photos show.

Don’t forget to give those side seams a good press to open them up.  It really helps you get a good finish and helps the hem lay nicely ready for sewing.  You can see the opening for the waist tie here, just above the tip of my iron.

 

Sew up that side seam hem (don’t forget the waist tie opening) and the hack is done.

 

It really is that easy! Now it’s done I have to make a little pair of shorts to wear with it for the spring/summer.  These winter months will fly by, right? Here’s hoping.

Happy sewing!

 

Dana x

….

Sewn in ties

Up next I wanted to show you how to make sure you don’t lose your Wrap belt 😉 I decided for my short sleeve option to actually sew the ties in the side seams instead of creating the belt. Start by cutting the 4 pieces for the belt. instead of making one long belt we will create two ties. Sew 2 of the 4 pieces right sides together along the long edges and one of the short ones. Turn the tie right side out through the raw edge. PRESS! Repeat the steps for the other tie. 

Use the belt hole marking on the pattern to place the ties on each side of the back of the Wrap Top as shown below. Align the raw edges. Sandwich the ties in between the right sides of the back and front pieces. Sew in place with your favorite stretch stitch. 

That’s it! Continue sewing the top as instructed in the pattern. Be cautious of the long ties when stitching, you want to make sure you don’t catch them when you sew the other steps. 

Here you go! The look of the Cozy Wrap without the risk or misplacing the belt. You can tie these in the front or the back of your shirt. 

….

Wrap Dress

With a few simple pattern modifications. you can use the Cozy Wrap Top to make an adorable dress!

You will be modifying a few pattern pieces that require custom sizing, so please read through the tutorial before cutting your fabric. The modifications will be dependent upon the size that you are making so I can’t provide exact dimensions for this tutorial.

For this dress, I used the knee length pattern pieces as my starting point.

Lengthen your Front pattern pieces to be the same length as the Back. I lined up the armscyes for the Front and Back pieces to determine how much longer I should extend the Front.

From this point, you will follow assembly instructions for the Cozy Top, including belt openings, but omitting the side split. You will sew the side seams together through the bottom hem.

Once you have the front and back of your dress assembled, you will measure the full length of your bottom hem to determine how wide your Bottom Hem Band should be. You will cut a band that is 8” tall by the length of your measurement.

For reference, mine was 53 ½” by 8” tall. You will fold the band in half, with wrong sides together, and sew to the bottom of your dress without stretching, matching raw edges.

Because you’re lengthening the front of your dress, your neckband will be lengthened by the same amount, adding an additional 1” to accommodate the ½” hem on each end.

Add closures of your choice, like snaps, to the neckband and dress front where you feel most comfortable. I wanted my dress to wrap tightly so I placed my closures near the side seams, on both sides. You’ll need to try on your dress to determine where you want your closures to be.

Now you’re ready to go, with no fear of your dress slipping open!

And the best part? You can still wear your dress as a cardigan. I’m crazy about versatile clothing!

Happy making!!

Rachel

….

Yoga Waistband

Anyone else can’t resist a good yoga waistband?? I’m not sure what it is about them but I just love them!  The extra support when folded up or comfort and security when folded over.  Either way, it’s a win in my book!  It’s also a super easy hack to add to your cozy pants and I’m going to show you how.  Essentially we are just doubling the height of your waistband.  If you want to wear your band up and are making the high-rise option, I recommend doing a few inches less than half. If you plan to wear it folded down- doubling is perfect for either the high or low rise waist. 

  

First, you’ll want to print and cut out your chosen waistband piece in your size.  

Now grab a few extra pieces of paper and tape them together.

Next, you’ll want to trace your waistband piece onto your new papers (make sure to leave a little extra room at the bottom).

Then you will line up the edge of the waistband with your traced waistband and tape.   Cut that out and it’ll be your new pattern piece.

Cut your fabric with this new pattern piece and attach as directed in the pattern.  You won’t add any drawstrings to this at all.  Then you are done!

Easy peasy and a fun different look.   Perfect for cozy pants or if you want them to lean towards an “athletic” style you can do that too!

Happy Sewing!

-Michelle

Wow! So many sew options to try! Which one will be your first? Be sure to post your Cozy Wrap and Pants in the Facebook group and on Instagram. We can’t wait to see them! 

Flutter Wrap – Easy Hacks

Bring on spring!! You have to admit that our latest release, the Flutter Wrap Dress is giving us all the spring and sunny vibes! I am so excited to share with you some easy hacks that the P4P blog team has prepared. Whether you like a thicker belt, neckbands or a split flutter sleeve, we have them all!

…..

Thicker belt/ties

Adding thicker ties to the wrap dress can be a cute variation to make them a feature of your sew.

Firstly, grab your pattern pieces for the waist ties. Measure the length of the short width and then double it. For example: if your ties measure 2 inches wide, then you need to cut them at 4 inches wide instead.

I like to remake my pattern pieces with the new measurements to make it quicker for cutting the ties out, but you could just as easily note the measurements and use a ruler and cutting tool to make your tie pieces too. Take your fabric and cut wider ties – one short and one long. Sew them as per instructions starting on page 17 in the pattern.

Next step is to sew a gathering stitch across the open end of the ties to reduce the width of the ties by half. Attach the ties as per the pattern instructions.

Happy sewing!

xx Katy

…..

Hemmed maxi flounce option

The wrap dress is gorgeous with the flounce option. However, I stumbled upon another beautiful way to finish the maxi length hem without the flounce or a straight hem line. All I did was cut my fabric using the flounce hem line then I sewed the hem with a 1/2 inch seam allowance.

The curve can be a little tricky. I recommend that you use a metal curved hem ruler, press your hem, and then clip it. If you don’t have a metal curved ruler, I suggest wash away hem tape. Either will give you a beautiful finish.

…..

Split flutter sleeves

For this hack, we are going to split the flutter sleeves for a fun and cute way to add a little extra detail to your flutter sleeves!

First, you will cut straight down the middle of the flutter sleeve pattern piece, then cut out your sleeve pieces. You will have four sleeve pieces instead of two. Begin constructing the garment as instructed, including the seam that is sewn to join the edges of the sleeve piece together.  

Next, lay the bodice face up with right sides out, place the sleeve piece on top with right sides together and match the top of the sleeve seam with the top of the bodice side seam. Pin in place all along the armscye, and butt the ends together once you get to the top shoulder seam. You may want to baste here where the edges meet together to prevent them from shifting around while sewing. Then stitch.

Press the armscye seam towards the shoulder seam, and repeat with the other side. Then construct the rest of the garment as indicated in the pattern. 🙂

Neckband

 

We’re going to show you how easy it is to replace the french binding on the gorgeous new Flutter Wrap Dress with a neckband.  Sometimes you may want a little extra coverage if you are planning on wearing the dress to work or if you are just quite large-busted, like me. It’s really easy to do and I hope you’ll love the results.

First of all you need to construct your dress as usual but do not cut out the ‘neck binding’ piece as we won’t be using it, however do remember to leave yourself a suitable piece of fabric to cut the neckband from later!  Follow the tutorial and stop when you reach the ‘finishing the neckline’ section. If you plan to add the flounce to the neckline along with the neckband then go ahead and follow the steps in the tutorial that show how to construct the neckline flounce and baste it into place.  In the example below I am not using a neckline flounce, to make it a little clearer for you.

 

 

You will need to measure the length of your unfinished neckline by measuring up the front of one bodice piece, along the top of the neck and down the other bodice piece.   The easiest way to do this is to fold the dress in half, matching the centre back and the ends of the two bodice pieces. I like to pop a few sewing clips on to hold it in place.

 

 

 

 My measurement from centre back to the end of the bodice is 28 inches.  Then I simply double this to find the entire neckline measurement: 28 X 2 = 56 inches. Then I take my 56 and multiply it by 90% to reach 50.4 (which I will round up to 50.5 inches).  This is the measurement I will use for the length of my neckband. The width of your neckband will depend on personal choice but I will use 3 inches, as once the neckband is attached with a ½ inch seam allowance I’ll be left with a 1 inch band width.  So my measurement is 3 X 50.5 inches, with the stretch going along the length of the band. Here is my band after cutting.

 

 

Then I attached my neckband as normal. Fold the fabric wrong sides together along the length.  Then find the middle of the band and mark with a pin or clip.

 

 

 

Attach the middle of the band, right sides together and raw edges up with the centre of the back bodice piece (it’s already marked by the centre seam).  Then you will need to stretch the band to fit the neckline up to the shoulder seams about the amount you would normally stretch a neckband to fit. I have included some photos for reference.

     

 

 

Next you clip the end of the neckband to the end of the bodice on the left side, and ease the neckband to the bodice front along its length.  You will need to slightly stretch the neckband to fit along the bodice length.  

 

 

 

 

 

Repeat for the other side of the bodice. Sew the neckband in place using a ½ inch seam allowance.  Flip the neckband up, press the seam allowance down and topstitch if desired.

 

 

 

 

You’re all done!

 

 

 

…..

Snap to Keep Neckline in Place

Sometimes when you have babies being held and tugging at you a true wrap top/dress can be risky if they pull the wrong way! Adding a quick and easy sew on snap right at the cross over of your vneckline is a super simple solution.  First grab some sew on snaps from your local craft shop or favorite online crafty retailer:

 

Try on your Flutter Wrap and mark with your favorite marking tool where you want your snaps.  I like to mark both sides exactly where I want each snap to make sure they’re nice and even.

 

 

Hand sew each snap on- I’m not a big hand sewing fan, but these only take a minute!

 

Enjoy your wrap stress free from moving around and exposing more then you want!

…..

Snaps instead of ties

 

Last but not least I wanted to show you how to replace the ties for the witty bitty flutter wrap dresses and tops. Some may find it easier to snap the outfit instead of tying it. For my example I used the knee length flutter sleeve option but this hack can be done to any of the styles. Let’s get started!

Cut the fabric pieces but skip the two ties (the long and the shorter one)! Using an erasable pen or tailor tack, make a mark 3/4″ away from the raw edge, between the two notches. See image below.

Sew the shoulder seam and add binding. I will show you now how to create a faux wrap with only one set of snaps. If you prefer a real wrap with two sets of snaps, scroll to the end of the blog. Place the dress front and back right sides together as shown below. Sew all 3 layers together on one of the side seams but only two layers (the ones that match at the arm opening) on the other side.

Hem the side of the overlapping piece as in the original pattern. You will now add two 3/4″x3/4″ of stabilizer to where the snaps will be placed. Use the initial marking points as a guide for the snaps.

Add the male snap to the wrap and the female snap to the other side. All done! The wrap dress look without the “hassle” of the ties.

As promised above, here is how to keep the wrap but still add snaps. Place the front and back of the dress right sides together as shown above and sew together the two layers ONLY on both sides, matching the armpit and bottom. Add snaps on both sides using the markings you did. Super duper easy!

 

Will you be sewing the first Flutter Wrap for you or for your little one? Regardless of your pick, we hope you will show it off in the Patterns for Pirates Facebook group and hash tag it on Instagram so we can admire it too!

Newest Patterns