Welcome to day 5 of the Peg Legs Sew Along! Today we will be sewing the inseam, hemming each leg and attaching them. Start by pinning (or clipping) the inseams on each leg, right sides together. You can either serger it or stitch it with your sewing machine. If you use your sewing machine for this step, make sure to use a stretch stitch!
If you’re using your serger, test the stitches on a scrap piece of fabric, preferably the same as the one you used for your pegs. Testing first will give you a chance to see if you need to make any adjustments to the tension or stitch length or width.
Once you’ve sewn the inseams you can either hem or sew the crotch curves. I prefer to hem first because I find it easier to maneuver if the legs are not attached together. When hemming your Peg Legs make sure you steam press before and after you stitch. You can use your coverstitch machine or your sewing machine for this step, just remember to use a stretch stitch.
Last step of the day is sewing the crotch curve. Pin or clip the curve right sides together, matching the inseam and the back and front rise. The easiest way to do this is to turn one of the legs inside out and place the other leg (right side out) inside.
You can see the day 5 video here !
When you’ve finished these steps, don’t forget to post a picture in the Peg Legs SAL Event and hashtag it #pegsalday5.
