Patterns for Pirates

P4P stylish, modern, wearable patterns

  • Home
  • Blog
    • Frequently Asked Questions
    • Pattern Releases
      • Free Patterns
    • P4P University
      • Fitting
      • Sewing with Stretch, Knit Fabrics
      • Sewing with Woven Fabrics
      • Sewing Machines
    • Sew-A-Longs
    • Fabric for Pirates
    • Pattern Hacks
    • Announcement
      • Blog Tours
      • Contest/Giveaway
  • Shop
  • Bundle Discounts
  • Flash Friday
  • Gift Cards
  • My Account
  • Cart

Lumberjack Sew Along – day 7

February 1, 2022

Wow!! I am so in love with all your Lumberjack shirt! You have outdone yourselves this past week. My little one said this was one of his favorite sew alongs I did. Could it be because he was the recipient of this shirt? 😉 “Mom, it’s so cool. I’ll wear it today at school!” This Lumberjack shirt was less than $9 in materials. Score!


 

But enough about me! Let’s give out some prizes!

First winner is Tammy Richards! Tammy won a $20 gift card from Patterns for Pirates and a mystery Fabric 4 Pirates package. Look at these 3 ( yes, THREE!) beautiful Lumberjack shirts she made for her loved ones. 


Our runner up is Barbara Wong. Barbara won a $20 gift card from Made for Mermaids. The Lumberjack she made looks so cozy and those covered buttons are mighty cute!


Thank you so much for joining the P4P sew along for January. I pass the baton to Colleen for the February SAL. See you back here in March! 

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Fabric for Pirates, Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Lumberjack Sew Along – day 6

January 29, 2022

Good morning friends! You did it!! You made it to the last sewing day. All we have left to do today is to hem the bottom and add the closures.

HEMMING

The Lumberjack features a 1/2″ hem allowance and a curved hem. Since the shirt is woven, I find it easier to run a serger stitch along the raw edge and press 1/4″. Stitch down then fold again 1/4″. Sew with a slightly longer stitch going very slow where the front plackets are. That part is pretty bulky. Give your hem a good steam press so that you eliminated any waviness from sewing the curved hem.

CLOSURES

Time to put the finishing touch on your Lumberjack. Choose your favorite closure and mark the placement. The pattern includes a marking guide that you can print, no additional tools needed. If you add buttons and buttonholes, take a look over our  Buttons 101 P4P University blog. I give you some tips and tricks for a smooth process. For my Lumberjack I opted for metal spring snaps. I love the look of these metallic snaps and how easy they are to install. You can see how I added them in the video below. 

Great job!! All you have left to do is add your final photo to the comments of day 6 photo in the Lumberjack SAL album. That’s where the team will pick the two winners. There is still time to catch up. Winners will be announced on Tuesday. 

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Lumberjack Sew Along – day 5

January 28, 2022

Hello, friends and welcome to day 5 of the Lumberjack Sew Along! We are almost there! I love seeing all the beautiful shirts being created this week. Today we tackle the collar or hood. 

Hood

For a more sporty look and “easier” construction you can add a hood to your Lumberjack. The hood can be made of either knit fabric or woven so you can get really creative with it. Line the hood with sherpa for a super cuddly one or line it with a fun minky print for an extra little something. Once you sew the hood pieces right sides together along the curve, place the lining and main right sides together. Sew along the face opening, turn right side out and top stitch. All you have left to do is attach the hood to the neck opening and finish the raw edge with single fold bias tape. I highly encourage you to use store bought bias tape, it will save you so much time. In a pinch, you can certainly create your own. 

Collar

Oh the dreaded collar! Let me guess! It’s the “scariest” part of shirt! I hope I can convince you today that collars can be fun and not so difficult. The key to a great looking collar is making sure that the seam allowance is correct throughout. Another advice I have for when creating the collar is to press as you go. Remember to fuse the interfacing to the lining pieces of both the collar and the collar stand. If you added woven cuffs yesterday, you will find that the process is pretty similar today. Do not skip pressing 1/2″ hem on the collar stand bottom lining! Just as for the cuffs, prepressing this fold helps tremendously when enclosing the raw edge of the neckline in the collar. 

You can see in the day 5 video how I added the woven collar to my Lumberjack. Once you finish your collar or hood, post a picture of your progress in the comments of day 5 photo of the Lumberjack  sew along album. 

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Lumberjack Sew Along – day 4

January 27, 2022

Welcome to the 4th day of the Lumberjack sew along. Today we finish the sleeves with either cuffs. 

Knit cuffs

The simplest way to finish the sleeves is with a knit cuff. Make sure that the fabric you use has great recovery and stretch. My favorite bases for cuffs are cotton spandex, rib knit and french terry. It is very important that you follow the grain of the fabric when cutting the cuffs. Lastly, press! Press and press some more! You will love the finished cuffs much better if you press throughout.

Woven cuffs

I opted for the woven cuffs for my Lumberjack. I love the classic look. If you have not done the vertical slits marked on the pattern pieces, now is the time to add them. You will now bind the opening with the fabric piece that is cut on the bias. Remember, the lining is the interfaced piece. 

Tip: Do not skip pressing the lining 1/2″ along the bottom. It will make a world of difference when you stitch the cuff on. 

If you need any visual help, take a look over today’s video. I show you step by step how to add  woven cuffs to your Lumberjack shirt. Once you finish the steps, post a photo of your progress in the comments of day 4 photo of this sew along album. 

 

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Lumberjack Sew Along – day 3

January 26, 2022

Ahoy, pirates! Today, on day 3, we add the sleeves and sew the side seams.

Sleeves

Start by running a basting stitch along the curve of the sleeve. Gently and ever so slightly pull on the basting threads so it creates a faint gather. This will help when easing the sleeves into the sleeve opening. Pin the sleeves to the bodice, matching the shoulder seams with the notches. Stitch down with a 1/2″ seam allowance making sure that there are no puckers or folds along the curve. 

If you are doing the unlined option, finish the raw edge with your serger or a zig zag stitch. If you are sewing the lined option, repeat these steps for the lining. 

Inseam pockets

Before you sew the side seams you have to add the pockets. You will notice that the pattern features two different pocket shapes depending on whether you line or not your Lumberjack. While the unlined pockets may seem “odd” they, are drafted this way so they will be stitched into the front placket. This will ensure that the pocket won’t peek out from under the shirt when worn. 

Make sure that you add the pocket placement slits/marking from the pattern pieces! It’s highly important that you follow the marking instructions. 

Side seams

Once the pockets are sewing in the side seams, place the shirt right sides together matching the underarm points. Sew with a 1/2″ seam allowance. If you opted for the unlined style, finish the raw edge with your serger. If you are doing the lined style, sew the side seams of the lining as well. Place your lining into the main, wrong sides together. Going forward you will treat this as one piece. 

Front placket

Press the front placket along the first fold line, then along the second one. Pin the lining front or the unlined option pockets in the front placket fold. Stitch down and press. 

You can see today’s video below. Once you complete the steps, post a photo of your progress in the comments of day 3 photo of the Lumberjack SAL album. See you back here tomorrow when we will sew the cuffs. 

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Lumberjack Sew Along – day 2

January 25, 2022

Welcome to day 2 of the Lumberjack sew along. Today we create and sew the chest pockets and the shoulder seams. This shirt features two optional chest pockets that tie the lumberjack look together. I would not skip them. Judy is showing you some tips to help you sew the chest pocket below.

I sew my chest pockets slightly different so definitely check out today’s video as well. I give you my tips and tricks for achieving a beautiful looking chest pocket. Once you added the chest pockets to the two front pieces, you are ready to sew the shoulder seams. 

If you are doing the lined option, you will be sewing the shoulder seam right sides together of the lining pieces as well as the main. I opted for the unlined style for my Lumberjack shirt so we will be sewing the shoulder seams using the burrito method. First, place the outer yoke and back piece right sides together. Now sandwich the back piece in between the right sides of the outer and lining yoke. Stitch in place and top stitch. Roll the back piece into a “burrito” and bring it up so that the front shoulders are sandwiched in between the RTS of the back yoke lining and main fabric. Stitch and optionally top stitch. 

You can see all these steps in today’s video. Once you complete day 2 steps, post a photo of  your progress in the comments of day 2 photo of the sew along album. See you back her tomorrow for day 3! 

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Lumberjack Sew Along – day 1

January 24, 2022

Welcome to the Lumberjack SEW ALONG! 

Let’s get the Lumberjack party started! If you have not purchased the Lumberjack pattern(s) you can grab them here:

Lumberjack Youth

Lumberjack Hourglass 

Lumberjack V figure

And of course, our bundle for the whole family

Before you select which style you are sewing along, take a look at the Round Up Blog where we show you all options available.

Now that you have the patterns it’s time to select which file format you would like to use. Both the Youth and the Adult come in A4 and Letter format to print at home, A0 format to print with a plotter or at a copy shop AND a projector file. If you use the projector file you will not have to print anything!! That’s definitely my favorite way! You can see in today’s video how I use the file to cut the fabric. 

Note: The tutorial is now a separate file from the pattern pieces. 

Let’s start by taking the measurements needed for the best fit. P4P has an amazing blog that gives you tips for accurately taking your measurements. You can read all about it here. If your measurements put you in a different size for chest/waist/hips be sure to check out our P4P University blog and grade to achieve the perfect fit. All 3 Lumberjack shirt patterns have straight side seams and relaxed fit so it is a little more giving when it comes to grading for the waist. 

Let’s talk fabric! The Lumberjack pattern is drafted for woven fabrics like flannel, light weight denim, light weight wool or medium weight cotton woven. For the lining you can use minky, fleece, flannel, french terry, sherpa…pretty much your preferred soft, cuddly fabric. For this sew along I am using a brushed flannel that I got from Joann fabrics. For the closures I am going to add spring snaps. Buttons are an option too 😉




Day 1 video is posted below. Check it out and once you are done cutting your fabric post a picture of it in the comments of the Day 1 photo of the Lumberjack SAL album in the M4M & P4P Sew Along group. If you sew more than one,  post each one in a separate pic!

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized 1 Comment

Flutter Wrap – Easy Hacks

March 3, 2020

Bring on spring!! You have to admit that our latest release, the Flutter Wrap Dress is giving us all the spring and sunny vibes! I am so excited to share with you some easy hacks that the P4P blog team has prepared. Whether you like a thicker belt, neckbands or a split flutter sleeve, we have them all!

…..

Thicker belt/ties

Adding thicker ties to the wrap dress can be a cute variation to make them a feature of your sew.

Firstly, grab your pattern pieces for the waist ties. Measure the length of the short width and then double it. For example: if your ties measure 2 inches wide, then you need to cut them at 4 inches wide instead.

I like to remake my pattern pieces with the new measurements to make it quicker for cutting the ties out, but you could just as easily note the measurements and use a ruler and cutting tool to make your tie pieces too. Take your fabric and cut wider ties – one short and one long. Sew them as per instructions starting on page 17 in the pattern.

Next step is to sew a gathering stitch across the open end of the ties to reduce the width of the ties by half. Attach the ties as per the pattern instructions.

Happy sewing!

xx Katy

…..

Hemmed maxi flounce option

The wrap dress is gorgeous with the flounce option. However, I stumbled upon another beautiful way to finish the maxi length hem without the flounce or a straight hem line. All I did was cut my fabric using the flounce hem line then I sewed the hem with a 1/2 inch seam allowance.

The curve can be a little tricky. I recommend that you use a metal curved hem ruler, press your hem, and then clip it. If you don’t have a metal curved ruler, I suggest wash away hem tape. Either will give you a beautiful finish.

…..

Split flutter sleeves

For this hack, we are going to split the flutter sleeves for a fun and cute way to add a little extra detail to your flutter sleeves!

First, you will cut straight down the middle of the flutter sleeve pattern piece, then cut out your sleeve pieces. You will have four sleeve pieces instead of two. Begin constructing the garment as instructed, including the seam that is sewn to join the edges of the sleeve piece together.  

Next, lay the bodice face up with right sides out, place the sleeve piece on top with right sides together and match the top of the sleeve seam with the top of the bodice side seam. Pin in place all along the armscye, and butt the ends together once you get to the top shoulder seam. You may want to baste here where the edges meet together to prevent them from shifting around while sewing. Then stitch.

Press the armscye seam towards the shoulder seam, and repeat with the other side. Then construct the rest of the garment as indicated in the pattern. 🙂

Neckband

 

We’re going to show you how easy it is to replace the french binding on the gorgeous new Flutter Wrap Dress with a neckband.  Sometimes you may want a little extra coverage if you are planning on wearing the dress to work or if you are just quite large-busted, like me. It’s really easy to do and I hope you’ll love the results.

First of all you need to construct your dress as usual but do not cut out the ‘neck binding’ piece as we won’t be using it, however do remember to leave yourself a suitable piece of fabric to cut the neckband from later!  Follow the tutorial and stop when you reach the ‘finishing the neckline’ section. If you plan to add the flounce to the neckline along with the neckband then go ahead and follow the steps in the tutorial that show how to construct the neckline flounce and baste it into place.  In the example below I am not using a neckline flounce, to make it a little clearer for you.

 

 

You will need to measure the length of your unfinished neckline by measuring up the front of one bodice piece, along the top of the neck and down the other bodice piece.   The easiest way to do this is to fold the dress in half, matching the centre back and the ends of the two bodice pieces. I like to pop a few sewing clips on to hold it in place.

 

 

 

 My measurement from centre back to the end of the bodice is 28 inches.  Then I simply double this to find the entire neckline measurement: 28 X 2 = 56 inches. Then I take my 56 and multiply it by 90% to reach 50.4 (which I will round up to 50.5 inches).  This is the measurement I will use for the length of my neckband. The width of your neckband will depend on personal choice but I will use 3 inches, as once the neckband is attached with a ½ inch seam allowance I’ll be left with a 1 inch band width.  So my measurement is 3 X 50.5 inches, with the stretch going along the length of the band. Here is my band after cutting.

 

 

Then I attached my neckband as normal. Fold the fabric wrong sides together along the length.  Then find the middle of the band and mark with a pin or clip.

 

 

 

Attach the middle of the band, right sides together and raw edges up with the centre of the back bodice piece (it’s already marked by the centre seam).  Then you will need to stretch the band to fit the neckline up to the shoulder seams about the amount you would normally stretch a neckband to fit. I have included some photos for reference.

     

 

 

Next you clip the end of the neckband to the end of the bodice on the left side, and ease the neckband to the bodice front along its length.  You will need to slightly stretch the neckband to fit along the bodice length.  

 

 

 

 

 

Repeat for the other side of the bodice. Sew the neckband in place using a ½ inch seam allowance.  Flip the neckband up, press the seam allowance down and topstitch if desired.

 

 

 

 

You’re all done!

 

 

 

…..

Snap to Keep Neckline in Place

Sometimes when you have babies being held and tugging at you a true wrap top/dress can be risky if they pull the wrong way! Adding a quick and easy sew on snap right at the cross over of your vneckline is a super simple solution.  First grab some sew on snaps from your local craft shop or favorite online crafty retailer:

 

Try on your Flutter Wrap and mark with your favorite marking tool where you want your snaps.  I like to mark both sides exactly where I want each snap to make sure they’re nice and even.

 

 

Hand sew each snap on- I’m not a big hand sewing fan, but these only take a minute!

 

Enjoy your wrap stress free from moving around and exposing more then you want!

…..

Snaps instead of ties

 


Last but not least I wanted to show you how to replace the ties for the witty bitty flutter wrap dresses and tops. Some may find it easier to snap the outfit instead of tying it. For my example I used the knee length flutter sleeve option but this hack can be done to any of the styles. Let’s get started!

Cut the fabric pieces but skip the two ties (the long and the shorter one)! Using an erasable pen or tailor tack, make a mark 3/4″ away from the raw edge, between the two notches. See image below.


Sew the shoulder seam and add binding. I will show you now how to create a faux wrap with only one set of snaps. If you prefer a real wrap with two sets of snaps, scroll to the end of the blog. Place the dress front and back right sides together as shown below. Sew all 3 layers together on one of the side seams but only two layers (the ones that match at the arm opening) on the other side.

Hem the side of the overlapping piece as in the original pattern. You will now add two 3/4″x3/4″ of stabilizer to where the snaps will be placed. Use the initial marking points as a guide for the snaps.


Add the male snap to the wrap and the female snap to the other side. All done! The wrap dress look without the “hassle” of the ties.


As promised above, here is how to keep the wrap but still add snaps. Place the front and back of the dress right sides together as shown above and sew together the two layers ONLY on both sides, matching the armpit and bottom. Add snaps on both sides using the markings you did. Super duper easy!

 

Will you be sewing the first Flutter Wrap for you or for your little one? Regardless of your pick, we hope you will show it off in the Patterns for Pirates Facebook group and hash tag it on Instagram so we can admire it too!

Filed Under: Frequently Asked Questions, Pattern Hacks, Pattern Release, Uncategorized 1 Comment

Featured Patterns

  • Loosey Goosey Loosey Goosey $12.00 Original price was: $12.00.$10.50Current price is: $10.50.
  • Loosey Goosey- Youth Loosey Goosey- Youth $10.00 Original price was: $10.00.$8.50Current price is: $8.50.
  • Loosey Goosey - Bundle Loosey Goosey - Bundle $20.00 Original price was: $20.00.$18.00Current price is: $18.00.
  • Everyday Shirt Everyday Shirt $12.00
  • Everyday Shirt- Youth Everyday Shirt- Youth $10.00
  • Privacy Policy
  • Refund Policy
  • Affliliate Program
  • Contact Us
  • About

Copyright © 2025 Patterns for Pirates

Copyright © 2025 · Genesis Framework · WordPress · Log in