Patterns for Pirates

P4P stylish, modern, wearable patterns

  • Home
  • Blog
    • Frequently Asked Questions
    • Pattern Releases
      • Free Patterns
    • P4P University
      • Fitting
      • Sewing with Stretch, Knit Fabrics
      • Sewing with Woven Fabrics
      • Sewing Machines
    • Sew-A-Longs
    • Fabric for Pirates
    • Pattern Hacks
    • Announcement
      • Blog Tours
      • Contest/Giveaway
  • Shop
  • Bundle Discounts
  • Flash Friday
  • Gift Cards
  • My Account
  • Cart

Flutter Wrap SAL day 7

April 28, 2020

What a fantastic week! Thank you so much for joining me in the Flutter Wrap sew along. The time has come to announce our winners and let me tell you… The mermaids/pirates team had a hard time picking!

Congratulations Gaelle Davila! As our first winner, Gaelle will receive a $20 Patterns for Pirates gift card and a $50 Oh So Pretty Custom Fabrics one.


We were also mesmerized by Tiffany Ottoson‘s dress! Tiffany is our second prize winner, a $20 gift card to Made for Mermaids and a $25 Oh So Pretty Custom Fabrics one.


A big THANK YOU to Oh So Pretty Custom Fabrics, our Sew Along sponsor, who also provided the bamboo lycra fabric for the videos.



Team Mermaids will be taking over the SAL group in May. Stay tuned for their pattern choice announcement!

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized 2 Comments

Flutter Wrap SAL day 6

April 25, 2020

Welcome to the last sewing day of the sew along! What a fun week! Today we add the bottom flounce flounce or hem the dress/shirt.

If you opted for the no flounce style, start by hemming the vertical raw edge first. Fold it 1/2″ and stitch it down with a zig zag stitch, a  coverstitch or twin needles.  Before you start, take a look over our Hemming blog because we have a few tips for easy and successful hemming. If you are finishing the bottom hem using twin needles, a good refresher blog is the P4P University Twin Needles Tips.

For my dress, I went with the flounce hem. Start by creating the very long flounce by sewing the pieces together as instructed in the pattern. If you added the neckline flounce yesterday, you will be doing a very similar process today. Once the flounce is created you will add it to the raw hem, right sided together. The ratio is 1:1 so you will not be stretching the dress or the flounce.

All done! All you have left to do is enjoy your gorgeous creation and show it off…you know… “I made it!” 😉


You can see today’s video below! Once you finish your dress or shirt snap a photo of it (modeled or not) and post it in the comments of day 6 photo of the Flutter Wrap Sew Along album in the SAL FB group. We will be choosing the two winners from the photos in the comments! Once you do your check in, please do share your work in the main Patterns for Pirates FB group too.

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized 3 Comments

Flutter Wrap SAL day 5

April 24, 2020

Ahoy, pirates! Today’s steps will be adding the neckline binding and creating & attaching the ties. Pretty easy! Start by pressing the binding 1/4″ inch along one of the long edges. Set that aside if you are adding the neck flounce.

Create the long neckline flounce by sewing the pieces right sides together as instructed in the pattern. Make sure you attach the flounce 1/2″ away from the ends. Once this step is completed, add the neckline binding right sides together with a 1/4″ seam allowance. Remember, the binding is not visible on the outside of the dress. 

Last thing we need to do today is to create the two ties. Take the long tie and fold it in half, lengthwise, right sides together. Sew along one of the short ends and the long one, turn inside out. It is very important that you attach the long tie to the side where you have the side opening.

Day 5 video is posted below, take a look. When you finished today’s steps post a picture of your progress in the comments of day 5 photo of the Flutter Wrap sal album in the M4M/P4P Sew Along group on Facebook.

 

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Flutter Wrap SAL day 4

April 23, 2020

Welcome to day four of the Flutter Wrap sew along! Today we add the sleeves or, if you selected the tank option, add the arm bindings. For my dress I decided to go with the flutter style. All sleeves will be added in the round.

  • For the short, 3/4 and long sleeves start by pressing a memory a 1/2 hem. Fold the sleeve right side together and sew the raw edges with a stretch stitch or you serger. Hem the sleeve…see how easy it is to stitch now that you have a memory hem done? 😉
  • If you opted for the tank style, start by pressing the binding 1/4″ along one of the long ends. This step will make it so “hassle free” when you fold the binding inside the arm opening.
  • The flutter style sleeve will not be hemmed. You will need to finish the serger thread tail. You can read about some of my favorite ways to finish the serger stitch here.

My flutter sleeves process in the video below. As always, once you complete today’s steps, post a picture of the shirt/dress in the comments of day 4 photo of the Flutter Wrap SAL album.

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Flutter Wrap SAL day 3

April 22, 2020

Day 3 is here! Today we start sewing. We are going to start by stitching the back pieces together at the center seam with a 1/2″ seam allowance. Once you have your back sewn, stitch the front pieces right sided together at the shoulder seam.

Tip: Add clear elastic to the shoulder seams to strengthen them and make sure the shoulders don’t stretch throughout the day. 

The Flutter Wrap pattern features set in sleeves but this time they are sewn in the round. That means that we will sew the side seams prior to adding the sleeves. Don’t forget to leave the opening for the wait tie. That will be on the wearer’s right.

You can see my progress below. Once you sew the back, shoulder and side seams post a picture of the shirt or dress in the comments of DAY 3 photo of the Flutter Wrap album in the SAL group.

 

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Flutter Wrap SAL day 2

April 21, 2020

Welcome to the second day of the Flutter Wrap sew along. Today we choose and cut the fabric. This is probably the “longest” day, depending on the style you chose but it’s a pretty easy one. The pattern is drafted for knit fabric with at least 30% stretch. Fabrics with soft drape will make the best flounces. My personal recommendations are rayon spandex, bamboo lycra, ITY, Cupro and double brushed poly. If you are looking for various fabric looks, check out the Flutter Wrap Round Up Blog where Judy show cases various materials that can be used.

For my dress I am using a stunning  Oh So Pretty bamboo lycra which has beautiful drape and a soft feel. Bamboo is my favorite fabric base ever so it was only natural that I picked this base. Oh So Pretty Custom Fabric is this sew along’s sponsor as well so our two lucky winners will be receiving gift card to treat themself to their custom prints (must be a member in the OSP Facebook group to qualify)


 

If you are unsure about which knit type will work best for your desired look, take a look over our P4P University Knit Types blog. We also included a cheat sheet that you can print. If you are like me and sometime are just keen on using a specific print for a specific pattern, read our Different fabric, different fit blog post before you cut your fabric.

The Day 2 video is posted below. Check it out and once you are done cutting your fabric post a picture of your pretty pile in the comments of the Day 2 photo of the Flutter Wrap SAL album in the M4M & P4P Sew Along group.

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

Filed Under: Frequently Asked Questions, Sew-A-Long, Uncategorized Leave a Comment

Flutter Wrap SAL day 1

April 20, 2020

Welcome to our Flutter Wrap Sew Along!

Day One is reserved to purchasing the pattern, printing and cutting the size(s) you need. If you plan on sewing for yourself you can get the Flutter Wrap here, if you’re sewing for your little one, the Flutter Wrap Youth can be purchased here and if you’re sewing for both of you (just think of the mommy and me matching outfits!) you can get the bundle. If you can’t decide which style to make, our Round Up blog will give you a glance at all options included with the pattern.

This sew along will be held in the the M4M & P4P Sew Along group so be sure to join the group not only for the exclusive discount code available for the Flutter Wrap patterns but also to post your progress this week. Don’t be shy about asking questions or suggestions, we are a helpful bunch. 🙂



Now that you purchased the pattern(s), print the size needed. In order to do that it is very important that you take your most accurate measurements. You will need your waist, hips and chest measurements in order to choose the correct Flutter Wrap size. P4P has an amazing blog that gives you tip for accurately taking your measurements. You can read all about it here. If your measurements put you in a different size for chest/waist/hips be sure to check out our P4P University blog and grade to achieve the perfect fit.

You can see in the video below how I blend two sizes to make my Flutter Wrap knee length with flounce a flutter sleeves. Once you cut your pattern pieces post “done” in the comments of day 1 photo of the Flutter Wrap Sew Along album in the SAL group. We don’t allow pictures of the pattern pieces so this comment will count as your daily check in.

 

Flutter Wrap SAL day 1 | Print and cut pattern

Flutter Wrap SAL day 2 | Cut fabric

Flutter Wrap SAL day 3 | Sew back, shoulder and side seams

Flutter Wrap SAL day 4 | Sew sleeves or tank binding

Flutter Wrap SAL day 5 | Add neckline binding and waist ties

Flutter Wrap SAL day 6 | Finish skirt

Flutter Wrap SAL day 7 | Winners announcement

 

Filed Under: Frequently Asked Questions, Pattern Hacks, Sew-A-Long, Uncategorized 1 Comment

Flutter Wrap – Easy Hacks

March 3, 2020

Bring on spring!! You have to admit that our latest release, the Flutter Wrap Dress is giving us all the spring and sunny vibes! I am so excited to share with you some easy hacks that the P4P blog team has prepared. Whether you like a thicker belt, neckbands or a split flutter sleeve, we have them all!

…..

Thicker belt/ties

Adding thicker ties to the wrap dress can be a cute variation to make them a feature of your sew.

Firstly, grab your pattern pieces for the waist ties. Measure the length of the short width and then double it. For example: if your ties measure 2 inches wide, then you need to cut them at 4 inches wide instead.

I like to remake my pattern pieces with the new measurements to make it quicker for cutting the ties out, but you could just as easily note the measurements and use a ruler and cutting tool to make your tie pieces too. Take your fabric and cut wider ties – one short and one long. Sew them as per instructions starting on page 17 in the pattern.

Next step is to sew a gathering stitch across the open end of the ties to reduce the width of the ties by half. Attach the ties as per the pattern instructions.

Happy sewing!

xx Katy

…..

Hemmed maxi flounce option

The wrap dress is gorgeous with the flounce option. However, I stumbled upon another beautiful way to finish the maxi length hem without the flounce or a straight hem line. All I did was cut my fabric using the flounce hem line then I sewed the hem with a 1/2 inch seam allowance.

The curve can be a little tricky. I recommend that you use a metal curved hem ruler, press your hem, and then clip it. If you don’t have a metal curved ruler, I suggest wash away hem tape. Either will give you a beautiful finish.

…..

Split flutter sleeves

For this hack, we are going to split the flutter sleeves for a fun and cute way to add a little extra detail to your flutter sleeves!

First, you will cut straight down the middle of the flutter sleeve pattern piece, then cut out your sleeve pieces. You will have four sleeve pieces instead of two. Begin constructing the garment as instructed, including the seam that is sewn to join the edges of the sleeve piece together.  

Next, lay the bodice face up with right sides out, place the sleeve piece on top with right sides together and match the top of the sleeve seam with the top of the bodice side seam. Pin in place all along the armscye, and butt the ends together once you get to the top shoulder seam. You may want to baste here where the edges meet together to prevent them from shifting around while sewing. Then stitch.

Press the armscye seam towards the shoulder seam, and repeat with the other side. Then construct the rest of the garment as indicated in the pattern. 🙂

Neckband

 

We’re going to show you how easy it is to replace the french binding on the gorgeous new Flutter Wrap Dress with a neckband.  Sometimes you may want a little extra coverage if you are planning on wearing the dress to work or if you are just quite large-busted, like me. It’s really easy to do and I hope you’ll love the results.

First of all you need to construct your dress as usual but do not cut out the ‘neck binding’ piece as we won’t be using it, however do remember to leave yourself a suitable piece of fabric to cut the neckband from later!  Follow the tutorial and stop when you reach the ‘finishing the neckline’ section. If you plan to add the flounce to the neckline along with the neckband then go ahead and follow the steps in the tutorial that show how to construct the neckline flounce and baste it into place.  In the example below I am not using a neckline flounce, to make it a little clearer for you.

 

 

You will need to measure the length of your unfinished neckline by measuring up the front of one bodice piece, along the top of the neck and down the other bodice piece.   The easiest way to do this is to fold the dress in half, matching the centre back and the ends of the two bodice pieces. I like to pop a few sewing clips on to hold it in place.

 

 

 

 My measurement from centre back to the end of the bodice is 28 inches.  Then I simply double this to find the entire neckline measurement: 28 X 2 = 56 inches. Then I take my 56 and multiply it by 90% to reach 50.4 (which I will round up to 50.5 inches).  This is the measurement I will use for the length of my neckband. The width of your neckband will depend on personal choice but I will use 3 inches, as once the neckband is attached with a ½ inch seam allowance I’ll be left with a 1 inch band width.  So my measurement is 3 X 50.5 inches, with the stretch going along the length of the band. Here is my band after cutting.

 

 

Then I attached my neckband as normal. Fold the fabric wrong sides together along the length.  Then find the middle of the band and mark with a pin or clip.

 

 

 

Attach the middle of the band, right sides together and raw edges up with the centre of the back bodice piece (it’s already marked by the centre seam).  Then you will need to stretch the band to fit the neckline up to the shoulder seams about the amount you would normally stretch a neckband to fit. I have included some photos for reference.

     

 

 

Next you clip the end of the neckband to the end of the bodice on the left side, and ease the neckband to the bodice front along its length.  You will need to slightly stretch the neckband to fit along the bodice length.  

 

 

 

 

 

Repeat for the other side of the bodice. Sew the neckband in place using a ½ inch seam allowance.  Flip the neckband up, press the seam allowance down and topstitch if desired.

 

 

 

 

You’re all done!

 

 

 

…..

Snap to Keep Neckline in Place

Sometimes when you have babies being held and tugging at you a true wrap top/dress can be risky if they pull the wrong way! Adding a quick and easy sew on snap right at the cross over of your vneckline is a super simple solution.  First grab some sew on snaps from your local craft shop or favorite online crafty retailer:

 

Try on your Flutter Wrap and mark with your favorite marking tool where you want your snaps.  I like to mark both sides exactly where I want each snap to make sure they’re nice and even.

 

 

Hand sew each snap on- I’m not a big hand sewing fan, but these only take a minute!

 

Enjoy your wrap stress free from moving around and exposing more then you want!

…..

Snaps instead of ties

 


Last but not least I wanted to show you how to replace the ties for the witty bitty flutter wrap dresses and tops. Some may find it easier to snap the outfit instead of tying it. For my example I used the knee length flutter sleeve option but this hack can be done to any of the styles. Let’s get started!

Cut the fabric pieces but skip the two ties (the long and the shorter one)! Using an erasable pen or tailor tack, make a mark 3/4″ away from the raw edge, between the two notches. See image below.


Sew the shoulder seam and add binding. I will show you now how to create a faux wrap with only one set of snaps. If you prefer a real wrap with two sets of snaps, scroll to the end of the blog. Place the dress front and back right sides together as shown below. Sew all 3 layers together on one of the side seams but only two layers (the ones that match at the arm opening) on the other side.

Hem the side of the overlapping piece as in the original pattern. You will now add two 3/4″x3/4″ of stabilizer to where the snaps will be placed. Use the initial marking points as a guide for the snaps.


Add the male snap to the wrap and the female snap to the other side. All done! The wrap dress look without the “hassle” of the ties.


As promised above, here is how to keep the wrap but still add snaps. Place the front and back of the dress right sides together as shown above and sew together the two layers ONLY on both sides, matching the armpit and bottom. Add snaps on both sides using the markings you did. Super duper easy!

 

Will you be sewing the first Flutter Wrap for you or for your little one? Regardless of your pick, we hope you will show it off in the Patterns for Pirates Facebook group and hash tag it on Instagram so we can admire it too!

Filed Under: Frequently Asked Questions, Pattern Hacks, Pattern Release, Uncategorized 1 Comment

Featured Patterns

  • Mae Top - Bundle Mae Top - Bundle $20.00 Original price was: $20.00.$18.00Current price is: $18.00.
  • Mae Bottom - Bundle Mae Bottom - Bundle $20.00 Original price was: $20.00.$18.00Current price is: $18.00.
  • Loosey Goosey - Bundle Loosey Goosey - Bundle $20.00
  • Bacall Bodysuit Bacall Bodysuit $12.00
  • Privacy Policy
  • Refund Policy
  • Affliliate Program
  • Contact Us
  • About

Copyright © 2025 Patterns for Pirates

Copyright © 2025 · Genesis Framework · WordPress · Log in