hood Archives - Patterns for Pirates

Lumberjack Sew Along – day 7

February 1, 2022

Wow!! I am so in love with all your Lumberjack shirt! You have outdone yourselves this past week. My little one said this was one of his favorite sew alongs I did. Could it be because he was the recipient of this shirt? 😉 “Mom, it’s so cool. I’ll wear it today at school!” This Lumberjack shirt was less than $9 in materials. Score!

But enough about me! Let’s give out some prizes!

First winner is Tammy Richards! Tammy won a $20 gift card from Patterns for Pirates and a mystery Fabric 4 Pirates package. Look at these 3 ( yes, THREE!) beautiful Lumberjack shirts she made for her loved ones.

Our runner up is Barbara Wong. Barbara won a $20 gift card from Made for Mermaids. The Lumberjack she made looks so cozy and those covered buttons are mighty cute!

Thank you so much for joining the P4P sew along for January. I pass the baton to Colleen for the February SAL. See you back here in March!

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Lumberjack Sew Along – day 6

January 29, 2022

Good morning friends! You did it!! You made it to the last sewing day. All we have left to do today is to hem the bottom and add the closures.

HEMMING

The Lumberjack features a 1/2″ hem allowance and a curved hem. Since the shirt is woven, I find it easier to run a serger stitch along the raw edge and press 1/4″. Stitch down then fold again 1/4″. Sew with a slightly longer stitch going very slow where the front plackets are. That part is pretty bulky. Give your hem a good steam press so that you eliminated any waviness from sewing the curved hem.

CLOSURES

Time to put the finishing touch on your Lumberjack. Choose your favorite closure and mark the placement. The pattern includes a marking guide that you can print, no additional tools needed. If you add buttons and buttonholes, take a look over our Buttons 101 P4P University blog. I give you some tips and tricks for a smooth process. For my Lumberjack I opted for metal spring snaps. I love the look of these metallic snaps and how easy they are to install. You can see how I added them in the video below.

Great job!! All you have left to do is add your final photo to the comments of day 6 photo in the Lumberjack SAL album. That’s where the team will pick the two winners. There is still time to catch up. Winners will be announced on Tuesday.

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Lumberjack Sew Along – day 5

January 28, 2022

Hello, friends and welcome to day 5 of the Lumberjack Sew Along! We are almost there! I love seeing all the beautiful shirts being created this week. Today we tackle the collar or hood.

Hood

For a more sporty look and “easier” construction you can add a hood to your Lumberjack. The hood can be made of either knit fabric or woven so you can get really creative with it. Line the hood with sherpa for a super cuddly one or line it with a fun minky print for an extra little something. Once you sew the hood pieces right sides together along the curve, place the lining and main right sides together. Sew along the face opening, turn right side out and top stitch. All you have left to do is attach the hood to the neck opening and finish the raw edge with single fold bias tape. I highly encourage you to use store bought bias tape, it will save you so much time. In a pinch, you can certainly create your own.

Collar

Oh the dreaded collar! Let me guess! It’s the “scariest” part of shirt! I hope I can convince you today that collars can be fun and not so difficult. The key to a great looking collar is making sure that the seam allowance is correct throughout. Another advice I have for when creating the collar is to press as you go. Remember to fuse the interfacing to the lining pieces of both the collar and the collar stand. If you added woven cuffs yesterday, you will find that the process is pretty similar today. Do not skip pressing 1/2″ hem on the collar stand bottom lining! Just as for the cuffs, prepressing this fold helps tremendously when enclosing the raw edge of the neckline in the collar.

You can see in the day 5 video how I added the woven collar to my Lumberjack. Once you finish your collar or hood, post a picture of your progress in the comments of day 5 photo of the Lumberjack sew along album.

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Lumberjack Sew Along – day 4

January 27, 2022

Welcome to the 4th day of the Lumberjack sew along. Today we finish the sleeves with either cuffs.

Knit cuffs

The simplest way to finish the sleeves is with a knit cuff. Make sure that the fabric you use has great recovery and stretch. My favorite bases for cuffs are cotton spandex, rib knit and french terry. It is very important that you follow the grain of the fabric when cutting the cuffs. Lastly, press! Press and press some more! You will love the finished cuffs much better if you press throughout.

Woven cuffs

I opted for the woven cuffs for my Lumberjack. I love the classic look. If you have not done the vertical slits marked on the pattern pieces, now is the time to add them. You will now bind the opening with the fabric piece that is cut on the bias. Remember, the lining is the interfaced piece.

Tip: Do not skip pressing the lining 1/2″ along the bottom. It will make a world of difference when you stitch the cuff on.

If you need any visual help, take a look over today’s video. I show you step by step how to add woven cuffs to your Lumberjack shirt. Once you finish the steps, post a photo of your progress in the comments of day 4 photo of this sew along album.

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Lumberjack Sew Along – day 3

January 26, 2022

Ahoy, pirates! Today, on day 3, we add the sleeves and sew the side seams.

Sleeves

Start by running a basting stitch along the curve of the sleeve. Gently and ever so slightly pull on the basting threads so it creates a faint gather. This will help when easing the sleeves into the sleeve opening. Pin the sleeves to the bodice, matching the shoulder seams with the notches. Stitch down with a 1/2″ seam allowance making sure that there are no puckers or folds along the curve.

If you are doing the unlined option, finish the raw edge with your serger or a zig zag stitch. If you are sewing the lined option, repeat these steps for the lining.

Inseam pockets

Before you sew the side seams you have to add the pockets. You will notice that the pattern features two different pocket shapes depending on whether you line or not your Lumberjack. While the unlined pockets may seem “odd” they, are drafted this way so they will be stitched into the front placket. This will ensure that the pocket won’t peek out from under the shirt when worn.

Make sure that you add the pocket placement slits/marking from the pattern pieces! It’s highly important that you follow the marking instructions.

Side seams

Once the pockets are sewing in the side seams, place the shirt right sides together matching the underarm points. Sew with a 1/2″ seam allowance. If you opted for the unlined style, finish the raw edge with your serger. If you are doing the lined style, sew the side seams of the lining as well. Place your lining into the main, wrong sides together. Going forward you will treat this as one piece.

Front placket

Press the front placket along the first fold line, then along the second one. Pin the lining front or the unlined option pockets in the front placket fold. Stitch down and press.

You can see today’s video below. Once you complete the steps, post a photo of your progress in the comments of day 3 photo of the Lumberjack SAL album. See you back here tomorrow when we will sew the cuffs.

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Lumberjack Sew Along – day 2

January 25, 2022

Welcome to day 2 of the Lumberjack sew along. Today we create and sew the chest pockets and the shoulder seams. This shirt features two optional chest pockets that tie the lumberjack look together. I would not skip them. Judy is showing you some tips to help you sew the chest pocket below.

I sew my chest pockets slightly different so definitely check out today’s video as well. I give you my tips and tricks for achieving a beautiful looking chest pocket. Once you added the chest pockets to the two front pieces, you are ready to sew the shoulder seams.

If you are doing the lined option, you will be sewing the shoulder seam right sides together of the lining pieces as well as the main. I opted for the unlined style for my Lumberjack shirt so we will be sewing the shoulder seams using the burrito method. First, place the outer yoke and back piece right sides together. Now sandwich the back piece in between the right sides of the outer and lining yoke. Stitch in place and top stitch. Roll the back piece into a “burrito” and bring it up so that the front shoulders are sandwiched in between the RTS of the back yoke lining and main fabric. Stitch and optionally top stitch.

You can see all these steps in today’s video. Once you complete day 2 steps, post a photo of your progress in the comments of day 2 photo of the sew along album. See you back her tomorrow for day 3!

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Lumberjack Sew Along – day 1

January 24, 2022

Welcome to the Lumberjack SEW ALONG!

Let’s get the Lumberjack party started! If you have not purchased the Lumberjack pattern(s) you can grab them here:

Lumberjack Youth

Lumberjack Hourglass

Lumberjack V figure

And of course, our bundle for the whole family

Before you select which style you are sewing along, take a look at the Round Up Blog where we show you all options available.

Now that you have the patterns it’s time to select which file format you would like to use. Both the Youth and the Adult come in A4 and Letter format to print at home, A0 format to print with a plotter or at a copy shop AND a projector file. If you use the projector file you will not have to print anything!! That’s definitely my favorite way! You can see in today’s video how I use the file to cut the fabric.

Note: The tutorial is now a separate file from the pattern pieces.

Let’s start by taking the measurements needed for the best fit. P4P has an amazing blog that gives you tips for accurately taking your measurements. You can read all about it here. If your measurements put you in a different size for chest/waist/hips be sure to check out our P4P University blog and grade to achieve the perfect fit. All 3 Lumberjack shirt patterns have straight side seams and relaxed fit so it is a little more giving when it comes to grading for the waist.

Let’s talk fabric! The Lumberjack pattern is drafted for woven fabrics like flannel, light weight denim, light weight wool or medium weight cotton woven. For the lining you can use minky, fleece, flannel, french terry, sherpa…pretty much your preferred soft, cuddly fabric. For this sew along I am using a brushed flannel that I got from Joann fabrics. For the closures I am going to add spring snaps. Buttons are an option too 😉

Day 1 video is posted below. Check it out and once you are done cutting your fabric post a picture of it in the comments of the Day 1 photo of the Lumberjack SAL album in the M4M & P4P Sew Along group. If you sew more than one, post each one in a separate pic!

Lumberjack Sew along – day 1 | cut fabric

Lumberjack Sew along – day 2 | chest pocket, shoulder seams

Lumberjack Sew along – day 3 | sleeves, side seams

Lumberjack Sew along – day 4 | cuffs

Lumberjack Sew along – day 5 | hood/collar

Lumberjack Sew along – day 6 | hemming, closures

Lumberjack Sew along – day 7 | winners announcement

Go Team SAL – day 7

November 2, 2021

Good evening, friends! Thank you everyone who joined us last week for the Go Team sew along. I had so much fun making the two jerseys for my kids. I know you are here to find out the winners so without further ado, here they are!

Congratulations, Mel Goulet! She is our first winner. Mel won a $20 gift card from Patterns for Pirates and a $30 gift card from Purple Dragon Fabrics.

Congratulations go to Naomi McGrath as well! Naomi won a gift card from Made for Mermaids valued at $20 and a $30 gift certificate from Purple Dragon Fabrics.

A huge THANK YOU to our sew along sponsor. Make sure you check out Purple Dragon Fabrics on Facebook to keep up to date with their sales and preorders.

November’s sew along will be hosted by the mermaids so keep an eye on the Facebook group! See you back here in 2022!

Go Team SAL – day 1 | cut fabric

Go Team SAL – day 2 | shoulder seams & neckline

Go Team SAL – day 3 | yokes

Go Team SAL – day 4 | sleeves

Go Team SAL – day 5 | side seams & hem bottom

Go Team SAL – day 6 | hem sleeves or add cuffs

Go Team SAL – day 7 | winners announcement

Lumberjack – Reversible Hack

November 1, 2021

It’s here! It’s here! And I don’t mean only the cooler weather! The updated Lumberjack Shacket is here and now it it’s available in V figure (based on men measurements) and Hourglass figure (women’s measurement). Everyone gets a Lumberjack shirt or shacket!

The pattern includes a lined and an unlined option so today on the b log I wanted to show you how to take the lined option and make it fully reversible! Yup, one shirt that can be worn both ways.

Let’s get started! Print and cut the pattern and fabric as instructed in the tutorial. Make sure you use the lined option. For this tutorial I used a nylon, poly blend woven (the solid black) and a custom minky (the green one) for the lining.

NOTE: the hood I used for this hack is 1″ smaller on the front that the final pattern. If you want to achieve this exact look, remove 1″ from the hood pieces as show below. If you use the pattern hood as is, make sure to read below what small adjustments you need to make.

Once all pattern pieces are cut sew the main bodice and add sleeves and pockets as instructed in the tutorial. Repeat with the lining. Set the bodices aside for now. Sew the hood as per the lined tutorial. Place the hood (lining out) right sides together on the lining neckline. The hood will be about 1/2″ shorter than the lining neckline.

Sew the hood in place with a 1/2″ seam allowance, making sure to stitch through all 3 layers.

If you use the pattern hood, you will place the lined hood right sides together with the MAIN, not lining. The center back will match the neckline back and the front point will reach the fold line of the inner fold line. Sew it in place. Lay the lining over, right sides together and stitch along the neckline. The hood will be sandwiched between the right sides of the bodices.

Tip: Tie the two sleeves in a knot for both main and lining so they are out of the way when you sew.

Place your main and lining right sides together matching the raw edges of the neckline and bottom. Pin them in place.

The main will be longer, that’s the way it is supposed to be.

Sew along the neckline, the hood will be sandwiched in between the main and lining. Sew the bottom edge too. Seam allowance for these steps is 1/2 inch.

Turn the jacket right side out. We will now top stitch the neckline and bottom hem.

When top stitching, fold the excess fabric down (or up) 1/2″ on the placket part. See picture below for how it will look both at the neckline and bottom hem.

Following the first fold marking, press the front placket once on both sides. Pin in place. I like to add a strip of water soluble double sided tape to the raw edge of the lining. It will help tremendously when sewing.

Note: if you used the bigger hood, it will go all the way to the fold on both sides.

Fold the placket one more time along the second fold line. This will no overlap over the raw edge of the lining, right where the double sided tape is. Press it down with your fingers. If you don’t have any DST handy for this step, you can always pin it in place. Sew the placket down.

I also like to top stitch all around the placket, on all 4 sides. Once you finish these steps (and your jacket looks like the pic below) set it aside.

CUFFS

Let’s work on the cuffs. Press both cuffs, length wise. Open them up and press the top of each cuff 1/2″. Thus will create a memory hem. With the cuffs opened up, sew each at the short end to create a loop.

Refold the top memory hem over the loop.

Place the unfolded raw edge of the cuff on the lining sleeve opening. You will stretch the cuff to fit the opening. Match the sleeve seam with the cuff seam. Sew in place with a 1/2″ seam allowance. Repeat this step with the other cuff and lining sleeve.

Time to make it look like a shirt! Push the lining sleeve through the main sleeve so they are wrong sides together.

Fold the cuff along the middle crease that we pressed earlier. The edge is still folded 1/2′. Once you bring the cuff over, the sleeve raw edge will be inclosed in the cuff. Pin the edge of the cuff on the sleeve all around.

Stitch the cuff down. Look how beautiful is the cuff with no raw edges on the lining! Take a second to admire your work!

BUTTONS

Sew the button holes on one of the plackets. Let’s add the buttons now! To make this Lumberjack fully reversible I added buttons on both sides of the placket. I hate to say it but the easiest way to do this is to hand 🖐 stitch 🖐 the buttons on both sides simultaneously. Make sure that you don’t pull the thread extremely tight. You need wiggle room for the buttons to be able to be fastened.

All done! This is how to take the newest Lumberjack pattern and turn it into a fully reversible shacket.

I am very excited to see if you take on this project! Don’t forget to share it in our Facebook group and on Insta!

Go Team SAL – day 6

October 30, 2021

Welcome to the last day of the Go Team sew along. All we have left to do today is add the cuffs or hem the sleeves. I did both options in today’s video. The short and 3/4 length sleeve have only a hemmed option.

When creating the cuffs it’s highly important to press the wrong sides together lengthwise. Stitch each cuff, right sides together to create a loop. Take a look over our P4P University Knit Cuffs blog to get some tips and tricks for beautiful cuffs.
If you are doing the hem option, you can use your sewing machine’s twin needles option or your coverstitch as I have. Before you start, take a look over our Hemming blog because we have a few tips for easy and successful hemming.

All done! Give your shirt or dress a good steam press and pair it with your favorite P4P bottoms for an extra cute look!

Needless to say, my little one loved both of his Mousefetti Go Team jerseys. 💜

Last Go Team sew along video is posted below. Once you complete your dress and/or jersey snap a photo of your finished project and add it to the day 6 photo comments in this SAL album. That is where the P4P team will select the winners. I do encourage you to share your pretty makes in the main P4P Facebook group so everyone can admire them. See you back here on Tuesday for the winners blog!